Features and benefits:1. Can be applied on damp surface2. Strong bond strength to substrate of concrete and render. The active element permeates into capillary pores of the substrate and forms a compact waterproof layer3. After the slurry membrane is dried, tiling can be done using Nicbond tile adhesive4. Can be used either on interior or exterior wall and floor5. Long term water resistance and good durability6. Water vapor permeability7. Water based, non-toxic, and easy to applyUses:1. Interior and exterior2. Underground garages, cellars, tunnel, concrete units, factory, warehouse, swimmingpools, drinking water tanksSurface preparation:1. The surface must be sound, clean and free from any contaminants such as oil andgrease2. Obvious pore and crack must be plastered with repair mortar, and sharp edge mustbe removedApplications:1. Mixing ratio: 25kg powder to 6-7kg of water2. Pour a suitable amount of water into a clean container and slowly add the powderinto water with constant stirring until the lump-free mixture is achieved3. Keeping interval mixing to avoid deposition4. Apply rigid waterproofing slurry with a trowel and spread evenly on the surface5. The second coat is applied after the first layer is dried. The third coat is appliedwhen necessaryDosage: about 2.5 to 3 kilograms powder for each square meterPrecautions:1. Other coating should not be done until the waterproof layer is entirely dry andcured2. Do not use the product with the temperature below 0 degree or in the conditionthat is very damp3. Do not mix the cured slurry with water and reuse it4. Do not add other materials including cement and stoneStandard executed: this product is in accordance with the JC900-2002 standard ofinorganic waterproof and leakage-preventing materialsPacking25kg/bag5kg/bagShelf life: unopened bags can be stored for up to 12 months in a cool dry environment
Product Name: Rigid Waterproofing SlurryModel Number: NIC-K11Place of Origin: ChinaFeatures and benefits:1. Can be applied on damp surface2. Strong bond strength to substrate of concrete and render. T
Features and benefits:1. Can be applied on damp surface2. Strong bond strength to substrate of concrete and render. The active element permeates into capillary pores of the substrate and forms a compa
This product is a kind of high-strength inorganic adhesive specially developed inallusion to the case that common cement cannot be used as the light constructionmaterial, polystyrene board. It can sub
Product Name: Thermal-Insulation Board AdhesivePlace of Origin: ChinaThis product is a kind of high-strength inorganic adhesive speciallydeveloped in allusion to the case that common cement cannot be
Features and benefits:1) Strong adhesion and excellent weather resistance2) Thin mortar technology adopted, with 1.5 ~ 3mm thick mortar, so as to lower theweight of building and the cold and heat brid
Surface preparation:All surfaces must be firm, rigid, clean, dry, sound and smooth. All grease, wax,oil, curing compounds, dust, plaster dropping sand paint must be removed prior tothe application of
This product is a kind of high-strength inorganic adhesive speciallydeveloped in allusion to the case that common cement cannot be usedas the light construction material, polystyrene board. It can sub
Features and benefits:1) Can be applied onto damp surface2) Strong bond strength to substrate of concrete and render; the activeelement permeates into capillary pores of the substrate and forms acompa
Likewise in category "Other Materials for Repair & Construction":
help
Add to favorite
Favorite products
