Features and benefits:1) This product is a brand-new modified polymer adhesive2) Good thixotropy and easy to apply; pasting titles and filling groutscan be finished at a time, saving time3) Excellent water resistance and anti-ageing4) Innocuous, and friendly to environment5) Good water resistanceApplication scope:It is mainly used for various small-sized leatheroid bricks and mosaicsSurface preparation:1) The surface should be dry, clean, and free from oil stain and otherloose substance2) The surface should have a higher strength, with a basic evennessand verticalityApplication:1) Mix the adhesive power with water at a ratio of 25: (8~9) to belump-free mixture; then let it stand for 3-5 minutes, restir again. Theproduct is now ready to use2) Use a notched apply to trowel the adhesive onto the substrate, with anarea of 1m2 each time, then trowel a thin-layer adhesive on the backof tiles and fill up adhesive to the grout joints. then paste tiles ontothe substrate press and make it firmDosage:1) Uses 3 x 3mm notched trowel, approx. 2 ~ 2.5kg/m.m2) The above-mentioned dosages are recommended for the even substrateTechnical parameters:1) Adjust time (min): >52) Open time (min): ≥103) Surface drying time: approx. 2h4) Appearance: white powder5) Shrinkage %: ≤0.506) Normal shear strength: ≥1.0MPa7) Water resistance shear strength: ≥0.7MPa8) Heat treatment resistance shear strength: ≥0.7MPa9) Freezing-thawing resistance shear strength: ≥0.7MPaPrecautions:1) Before application, check the state of the substrate2) This product had better be used at 5oC∼40oC3) In summer, if the temperature of the substrate is too high ≥40oC),damp it with water, in case of too fast water shortage of the adhesive /on the substrate and affecting quality4) Do not mix the cured adhesive with water and reuse it5) About 2-3 hours after application, use a piece of wet cloth done andsponge clear the surface of the tiles6) Following applications should be done more than 24 hours after thisapplicationStandard executed:JC/T547-94 (adhesives for ceramic wall and floor tiles)Shelf life:It shall be stored in the cool and dry place, and can be stored for 1 year if notopened.Packing:20kg/bag, 5kg/bag
Features and benefits:1. Can be applied on damp surface2. Strong bond strength to substrate of concrete and render. The active element permeates into capillary pores of the substrate and forms a compa
Product Name: Rigid Waterproofing SlurryModel Number: NIC-K11Place of Origin: ChinaFeatures and benefits:1. Can be applied on damp surface2. Strong bond strength to substrate of concrete and render. T
Features and benefits:1. Can be applied on damp surface2. Strong bond strength to substrate of concrete and render. The active element permeates into capillary pores of the substrate and forms a compa
This product is a kind of high-strength inorganic adhesive specially developed inallusion to the case that common cement cannot be used as the light constructionmaterial, polystyrene board. It can sub
Product Name: Thermal-Insulation Board AdhesivePlace of Origin: ChinaThis product is a kind of high-strength inorganic adhesive speciallydeveloped in allusion to the case that common cement cannot be
Features and benefits:1) Strong adhesion and excellent weather resistance2) Thin mortar technology adopted, with 1.5 ~ 3mm thick mortar, so as to lower theweight of building and the cold and heat brid
Surface preparation:All surfaces must be firm, rigid, clean, dry, sound and smooth. All grease, wax,oil, curing compounds, dust, plaster dropping sand paint must be removed prior tothe application of
This product is a kind of high-strength inorganic adhesive speciallydeveloped in allusion to the case that common cement cannot be usedas the light construction material, polystyrene board. It can sub
help
Add to favorite
Favorite products
