Адрес: 33-1, Lane 176, Roosevelt Rd., Sec. 5, Taipei
Телефон: +886-2-29334329
.
Sand filter provides the removal of solids/particles suspended in the liquid by passing through a filter bed comprised of a granular or filter medium with the functions of sediment, straining, impacting, coherence, and adhesion. The raw wastewater is fed and distributed through an inlet partition, and the solids/particles are retained while flowing through the filter medium bed. The filtered water is collected in the underdrain system, which is also used to re-suspend and backwash the filter medium at the end of filtration run to remove the solids/particle wastes. It is ideal and efficient for waster and wastewater tertiary treatment. Purpose: Remove solids/particles in tertiary water/wastewater treatments. Features: Numerous filtration bed media and their combinations: anthracite, sand, garnet, limonite, granular activated carbon, and ion exchange resins. Functional modes: filtration run, backwash, discharge, transitional flow, bypass, and test. Modular capacity ranges from 5 to 100 m3/hr. Applications: For the uses of long filter run, low O/M cost, and superior effluent quality: 1. Advanced treatment of wastewater effluent polishing. 2. Groundwater, washing water, and process water purification. 3. Swimming pool, landscape fountain water, Sauna water, and cooling tower make-up water recycling/reuse.
Sand filter provides the removal of solids/particles suspended in the liquid by passing through a filter bed comprised of a granular or filter medium with the functions of sediment, straining, impact
Sand filter provides the removal of solids/particles suspended in the liquid by passing through a filter bed comprised of a granular or filter medium with the functions of sediment, straining, impact
The belt filter press is a continuous-feed dewatering device that applies chemical conditioning, gravity draining, and mechanical pressure to dewater sludge. The sludge/slurry is sandwiched between t
The belt filter press is a continuous-feed dewatering device that applies chemical conditioning, gravity draining, and mechanical pressure to dewater sludge. The sludge/slurry is sandwiched between t
1 BOccupy square measure: 2M 2M . 2 BAfter drying sludge, the water content is only about 2%-10%. 3 BReduce not only the dimension of sludge, but Also the expense of disposing sludge. 4 BAuto oper
Purposes: The jet aerator is designed to draw air in through a hollow tube/pipe and inject it underwater at high velocity and propeller action to create turbulence and diffuse air bubbles. Features:
Purposes: The jet aerator is designed to draw air in through a hollow tube/pipe and inject it underwater at high velocity and propeller action to create turbulence and diffuse air bubbles. Features:
The belt filter press is a continuous-feed dewatering device that applies chemical conditioning, gravity draining, and mechanical pressure to dewater sludge. The sludge/slurry is sandwiched between t
The belt filter press is a continuous-feed dewatering device that applies chemical conditioning, gravity draining, and mechanical pressure to dewater sludge. The sludge/slurry is sandwiched between t
Так же в категории "Оборудование для контроля загрязнения":
помощь**
Добавить в избранное
Отложенные товары
