|
|
Exterior Super Putty
Features and benefits:1) An exceptionally formulated high strength two-component based coatingmaterials for existing exterior wall surface before painting2) Easy to spread3) Anti-crack4) Easy sanding and alkali-resistant5) Suitable for the surface renewSurface preparation:The surface must be free from any contaminants such as oil, grease, cement mortarmust be allowed to cure for at least 7 days. If the surface is too dry, damp withwater before coating.Applications:1) Mixing ratio: powder:additive:water = 20kg:2.5kg:5-7kg2) According to the proportion of water and powder, firstly pour waterand additive into a clean container, add powder, stirring with anelectrical mixer into lump-free mixture; restirring after stand for 5-10minutes, so as to achieve the optional effect3) Applies the first layer with a trowel and spread evenly on the wall. Allowthe first layer to dry for at least 4 hours, the second coat is followed. Thetotal thickness of coating should be at least 1mmDosage:Approx.: 1.5-2kg/m.m (depending on the substrate condition)Technical parameters1) Appearance: grey or white and liquid additive powder2) Workability: good3) Drying time: approx. 3h4) Water resistance (48h): excellent5) Resistance to alkali (24h): excellent6) Bonding strength: >0.70MPa7) After water immersion: >0.50MPaPrecautions:1) Do not mix the cured adhesive with water and reuse it2) The mixture should be used up within 5 hours3) Do not use the product with the temperature above 40oCor below 5oC4) Avoid using the product during rainy daysShelf life:Saved in cool and dry pace, the temperature for the ingredient of the liquid cannotbe less than 5oC; unopen products can be stored for one yearPacking:20kg/bag + 2.5kg/pot
 Add to Basket
 Web address
|
help
Add to favorite
Favorite products
