Features and benefits:1) Can be applied onto damp surface2) Strong bond strength to substrate of concrete and render. The activeelement permeates into capillary pores of the substrate and forms acompact waterproof layer3) After the slurry membrane is dried, tile adhesive can be used directlyonto the waterproof layer4) Can be used either on interior or exterior wall and floor5) Water resistance and good durability6) Water vapor permeability7) Ageing resistance, innocuous, harmless and environment-protectedApplication scope:1) Indoor and outdoor structures, concrete, cement render and brick wall forwaterproofing2) Irrigation works, machine room, foodstuff storehouse, tunnel, undergroundparking, wall, floor, swimming pool, kitchen, toilet and drinkable water poolSubstrate preparation:1) The substrate must be firm, clean, even and free from grease, oil2) The obvious pores, sand holes must be plastered with repair mortar, andsharp edge must be removed3) If the temperature of the substrate is too high, it should be damp withwater but no obvious waterInstructions:1) Mixing proportion: 25kg powder: 9kg additive: 0~1kg water2) Add the additive into the container, then pour the powder agent intothe water slowly; mix them until a lump-free mixture is achieved3) Use a brush or rolling brush to apply the slurry onto the substrateand spread evenly4) The second coat is applied after the first layer is dried and spreadvertically. The third coat is applied when necessaryNormal dosage:The thickness of the painted film shall be 1.0~1.2mm about 20~25m²/set.Note:The above-mentioned dosage is for the case when the substrate is even.Precautions:1) Other covering layers can not be done until the waterproof layer is drycompletely2) The application cannot be conducted below 5°C; do not apply it in theextremely wet and bad-ventilated surroundings so as to affect theformation of the waterproof film3) Do not mix the cured slurry with water and reuse it4) Do not use it in the place where there are shocks, moving and big cracksShelf life:Unopened products can be stored for up to 12 months in cool dry environment.Liquid additive can not be stored under temperature lower than 5°C.Packing:1) 25kg powder + 9kg additive/set2) 5kg powder + 1.8kg additive/set
Features and benefits:1) NIC-C6 is specially formulated to produce an extra high strength for fixingof marble, ceramic tiles and natural stones, especially on exterior walls2) Can be used on concrete,
Features and benefits:1) This product is a brand-new modified polymer adhesive2) Good thixotropy and easy to apply; pasting titles and filling groutscan be finished at a time, saving time3) Excellent
Features and benefits:1. Can be applied on damp surface2. Strong bond strength to substrate of concrete and render. The active element permeates into capillary pores of the substrate and forms a compa
Product Name: Rigid Waterproofing SlurryModel Number: NIC-K11Place of Origin: ChinaFeatures and benefits:1. Can be applied on damp surface2. Strong bond strength to substrate of concrete and render. T
Features and benefits:1. Can be applied on damp surface2. Strong bond strength to substrate of concrete and render. The active element permeates into capillary pores of the substrate and forms a compa
This product is a kind of high-strength inorganic adhesive specially developed inallusion to the case that common cement cannot be used as the light constructionmaterial, polystyrene board. It can sub
Product Name: Thermal-Insulation Board AdhesivePlace of Origin: ChinaThis product is a kind of high-strength inorganic adhesive speciallydeveloped in allusion to the case that common cement cannot be
Features and benefits:1) Strong adhesion and excellent weather resistance2) Thin mortar technology adopted, with 1.5 ~ 3mm thick mortar, so as to lower theweight of building and the cold and heat brid
help
Add to favorite
Favorite products
