Address: 2F., No.146, Sec. 1, Tung-Hsing Rd. Jubei City, Hsinchu 302, Taiwan
Phone: +886-3-5508137
Embedded Computer
Mini size with TTL interface Watch Dog Timer: 1.34 sec. auto reset Provide 4 channel logic I/O, 3.3V/5V max. (programmable for AP) Jumper to enable/disable AP firmware COM/LAN/RUN LED indication pin Configuration: Web Server Page/Telnet Console Windows based utility for IP configuration Upgrade firmware from remote-PC via Ethernet Programmable with built-in C software development kit The Embedded Serial Server SE1001T is a gateway between Ethernet (TCP/IP) and serial signal communications. It can be built into any facilities or equipments, and converts any serial port to Ethernet network. By encapsulating serial data and transporting it over Ethernet, SE1001T allows bi-directional data transmission to be transparent between serial port and Ethernet. By using this unit, limited distance, point-to-point, direct serial connections can now be extended to the facility or equipment. In the industrial and manufacturing automation, SE1001T can be embedded into most field devices, including PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, UPS, Electronic Meters and Controllers Automation Devices. These devices will soon be linked to the network. Existing Windows-based applications can access serial-Ethernet devices by using Atop Virtual COM software which creates virtual serial ports on the host computer mapping to the remote Serial Server over Ethernet. Flexible configuration options allow the unit to be setup remotely over Ethernet by Telnet, web browser, or other windows utilities. It is not only a transparent, cost-effective, network-enabled serial device, but also it is easy to install.
Features 10/100BaseT(X) (RJ45) Broadcast storm protection Support IEEE 802.3/ 802.3u/ 802.3x 10/100M, Full/Half-Duplex, MDI/MDI-X auto-detection Redundant dual DC power inputs Operating t
Cigarette pack size Rugged metal case with DIN-Rail/wall-mount Watch Dog Timer 1.34 sec. hardware auto reset 15KV ESD protection for serial signals 10/100Mbps Fast Ethernet full duplex auto
Single-port DIN-Rail model Metal housing with IP50 standard 15 KV ESD protection for serial ports 10/100Mbps Fast Ethernet full duplex auto negotiation. Support multiple link mode with TCP
8/16-port Ethernet serial server with: RISC 32bits 266MHz CPU with high speed 266MHz DDRAM 19-inch rack-mount metal housing Software selectable RS-232/RS-485/RS-422 with Gas Discharge Tube for
Multiple reader connection with on-line checking Burglar and fire alarm sensor connection Third party card reader (slot / proximity reader K K) CPU: 16 bit SRAM: 512K Bytes FLASH: 512K Bytes, AP
* DIN-Rail metal housing with IP50 standard * One serial port, RS-232/RS485/RS-422 software selectable * 15KV ESD protection for serial port * 802.11g/b with WPA security * 10/100M Ethernet port for
help
Add to favorite
Favorite products
