Address: Side of Chenggui Road, Miaopuchang, Xin'an Village, East Zone, Zhongshan, Guangdong, China (Mainland) Zip: 528403
Phone: +86-760-8237009
CNC Condenser Bender
Product Name: CNC Condenser BenderModel Number: CDBM-1500/1FPlace of Origin: ChinaUse: used to bend condensers at an angle and make them change "L" shape or "U" shape to fulfill overall design in air conditioner and the requirement of product techniqueFeatures:1) Three axes CNC, accurate location and smooth bend2) High degree of automation and convenient adjustment3) The fins do not fall easilySpecifications:1) Wall thickness of coil: 22mm / layer, max. three layers, numerical setting2) Bending radii: R69 (1-3 layers), can be made to order3) Bending angle: 0-110°, numerical setting4) Precision bend ±0.1°, platform up and down±0.1 mm,locating±0.1mm5) Locating length of coil 400mm-1,000mm pre-location6) Control mode: jog, manual, auto7) Max. width of coil: 900mm/1,200mm/1,500mm8) Max. length of coil: 2,500mm9) Short edge length of bend:a) The first layer: ≥60mmb) The second layer: ≥80mmc) The third: ≥110mm10) Clamping travel of coil: 150mm11) Travel of platform up and down: 0-120mm12) Cycle of auto working: 12-15s13) Air pressure range: 0.3-0.5MPa14) Power supply: three-phase, four-wire, AC 415V 50Hz15) Total power: 4.5kW16) Gross weight: 1,600kg
Use: 3D forming full automatic equipment for air-condition tubing. It is used to straighten, set length, chipless cut, end form and 3D bend the coil copper pipe and it works with automatic mode in the
Product Name: CNC Cutting and Bending Integrative MachineModel Number: TBCEM15/20/25-R1Place of Origin: ChinaUse: 3D forming full automatic equipment for air-condition tubing. It is used to straighten
Use: used to bend evaporators at an angle and make them change "L" shape, "U" shape or "G" shape to fulfill overall design in air conditioner and the requirement of product techniqueFeature:1) Three a
Product Name: CNC Evaporator BenderModel Number: EPBM-300/3G-CPlace of Origin: ChinaUse: used to bend evaporators at an angle and make them change "L" shape, "U" shape or "G" shape to fulfill overall
Features:1) Three axes CNC, pneumatic clamping2) Table format program, convenient operation3) Exquisite appearance, good machining technologyCNC system:1) Standard type: 7" color screen, integrative k
Use: 3D molding of various tube. Widely applied to air-condition, engine and furnitureFeatures:1) Three axes CNC, hydraulic clamping, integrative oil-tank2) Feeding is driven by gear and rack. All axe
Product Name: CNC Pipe BenderModel Number: TBM30/35/40Place of Origin: ChinaUse: 3D molding of various tube. Widely applied to air-condition, engine and furnitureFeatures:1) Three axes CNC, hydraulic
Product Name: CNC Pipe BenderModel Number: TBM15/20/25Place of Origin: ChinaFeatures:1) Three axes CNC, pneumatic clamping2) Table format program, convenient operation3) Exquisite appearance, good mac
Use: this equipment is used for punching and flanging of copper pipe and makes the pipe look like a flute. It is mainly applied in the business of air-condition tubing.Features:1) Servo feeding, hydra
help
Add to favorite
Favorite products
