|
HID Card Reader
|
|
PCB module can read all standard HID card, output interface is wiegand or RS232 TTL.small size : 20*30mmreading distance is : >6 cmworking voltage: +5Vcurrent: 20 mA
|
| |
Hid Compatible Proximity Card Reader
|
|
We are making hid compatible card reader, it can read all standard hid card. This card reader with wiegand26/34 output interface, this reader is compatible with hid6005, small size.5 wires output.Spec
|
| |
Hid Compatible Proximity Card Reader Module
|
|
Hm08-wr is hid compatible reader module with two kinds output format, they are wiegand and rs232. Once card is detected by module, data will be send out on the different output pin.SpecificationSize 2
|
|
|
Long Distance Em Card Reader
|
|
Support em4100 compatible ID cardBuilt-in reception antenna, operation frequency is 125khzWork voltage: +12vCurrent: ~ 100maOutput interface: Wiegand26 or customizeResponding speed: Less than 0.1sResp
|
| |
Long Range HID Card Reader
|
|
HM100 is HID compitable long range proximity card reader, it reads all HID proximity card and send data via wiegand interface.Specification as below:Support all HID proximity cardReading distance: 20-
|
| |
Mifare Proximity Card Reader Module
|
|
Mm06 is mifare serial number only proximity reader module. It is intended primarily for use in access control system applications. Mm06 reads the mifare card identification number and transmits it to
|
|
|
Mifare Read Only Reader / Module
|
|
MM06 is Mifare serial number only proximity reader module. It is intended primarily for use in access control system applications. MM06 reads the Mifare card identification number and transmits it to
|
| |
Mifare1 Read Only Reader
|
|
M6100 is mifare serial number only proximity reader. It is intended primarily for use in access control system applications. M6100 reads the mifare card identification number and transmits it to the a
|
| |
EM+Mifare Card Reader
|
|
ReadEM and Mifare card automaticly.Wiegand26 bit output+5V-16V power inputReading distance:5-10cm
|
|