ACCESSEN plate heat exchangers select stainless steel plates are originally importedfrom Europe. The thickness of the plate is about 0.5-0.6mm and its useful lifeis much longer than normal heat exchanging plate. As one of the suppliers whohave ability to meet the minimum differential temperature of 1C, our strict requirementon material and unique design of heat exchanging plate make our plates ableto withstand the pressure of 25Bar at a thickness of 0.5mm and the pressureof 40Bar at a thickness of 0.6mm.ACCESSEN Plate heat exchangers consist of a number of corrugated plates. The platepack is mounted between a fixed and movable pressure plate, positioned by an upperand lower carrying bar, and compressed by several tightening bolts. The mediainvolved in the heat exchange process, are fed into the plate pack via connectionson the fixed and movable pressure plates.The arrangement of the plates creates two separate channel systems, enablingthe two media to flow past and between each other without physical contact, leavingthe exchanger again via connections in the pressure plates. Plate with differentpatterns can be mixed in the heat exchanger in order to achieve optimum efficiencyat a given pressure drop. By installing special distribution plates in theplate pack, the media can be conducted several times through the flow channel.1) ACCESSEN PHES2) DN50-DN3003) Plate thickness: 0.5-1.0mm4) Material: stainless steel, Ti, hastelloy, Ni, etc.5) Gaskets material: NBR, EPDM, chloroprene, TP, FPM, etc.6) Processing quantity: 50-2,000cbm/h7) Max. press: 25bar8) Max. temperature: 180°CPacking: wooden case
помощь**
Добавить в избранное
Отложенные товары
