HM6607 is a ISO15693 tag reader and writer. It works with tag such as PHILIPS I-code, TI Tag-it, and Pico etc.It works in middle range 30-40cm and also can work in long range (0.8-1meter), see detail as below:1. Working voltage: +12V2. Working frequencey:13.56MHz3. Support cards: ISO15693 standard, such as I-code, Tag-it, My-D and Pico etc.4. Read/write distance:30 cm(inside antenna); 90cm extenal antenna5. Output interface: RS232/RS485/TTL6. Indication: LED or buzzer7. Size:195(H)*165(W)*25(T)mm
HM6033 EM+HID card reader, reads EM and HID card together, data is sent via Wiegand interfce, Wiegand 26 or 34 for EM.Input power can be 5-16VDCStandby current:30 mASupport cards: All standard HID car
PCB module can read all standard HID card, output interface is wiegand or RS232 TTL.small size : 20*30mmreading distance is : >6 cmworking voltage: +5Vcurrent: 20 mA
We are making hid compatible card reader, it can read all standard hid card. This card reader with wiegand26/34 output interface, this reader is compatible with hid6005, small size.5 wires output.Spec
Hm08-wr is hid compatible reader module with two kinds output format, they are wiegand and rs232. Once card is detected by module, data will be send out on the different output pin.SpecificationSize 2
Support em4100 compatible ID cardBuilt-in reception antenna, operation frequency is 125khzWork voltage: +12vCurrent: ~ 100maOutput interface: Wiegand26 or customizeResponding speed: Less than 0.1sResp
HM100 is HID compitable long range proximity card reader, it reads all HID proximity card and send data via wiegand interface.Specification as below:Support all HID proximity cardReading distance: 20-
Mm06 is mifare serial number only proximity reader module. It is intended primarily for use in access control system applications. Mm06 reads the mifare card identification number and transmits it to
MM06 is Mifare serial number only proximity reader module. It is intended primarily for use in access control system applications. MM06 reads the Mifare card identification number and transmits it to
M6100 is mifare serial number only proximity reader. It is intended primarily for use in access control system applications. M6100 reads the mifare card identification number and transmits it to the a
Так же в категории "Дополнительное оборудование для беспроводных сетей":
помощь**
Добавить в избранное
Отложенные товары
