Conveyor belt repair adhesive SK313Conveyor belt repair adhesive SK313 is for bonding metel to rubber, rubber to rubber , fabrci to rubber, fabric to fabric and fabric to metal.Applying to flied of conveyor belt repair , pulley lagging and conveyor belt cold vulcanizing joint etc.conveyor belt repair adhesive SK313 have been approved by underground safety stardards.it is not flammable, consisting of 1kg adhesive and 100g hardener.Belt repair glue can resistant temperature of 140 centigrade. Mixed it by the ratio of 10:1, 1 kg adhesive with 100g hardener. Kindly note the mixture must be used within 1 hours.On site repair method of conveyor belt part damage:1. Roughting conveyor belt by tungsten carbide buffing disc, clean buffing dust by brush, if necessary,clean it by Cleaning fluid to get a deeper cleaner.2.Mixing Sk313 adhesive with hardener by the ratio of 10:1 (1kg sk313 with 100g hardener),fully stiring it well.kindly note mixture must be used within 1 hour,in case of the hardening losing efficacy.3.Applying two thin coats on each bonding surface, repair stirps with CN bonding layer needn't apply the first cost. the first coat must be dried completely,and reach the degree of not stick finger back. while the second coat is dried until it is slightly tacky (check with the back of finger),it is time to bonding the surface.Note that if the second coat is overdrying, apply another coat.4.Put the repair strip onto the repair surface,avoiding air inclusions. Press on and Stitcher on firmly.Conveyor belt repair adhesive Sk313 is widly exported to Southeast Asia, the Middle East, South America, Africa, and Europe countries.It have gotten high reputation among users such as power plant, coal mine, steel mills and port.
conveyor belt repair strip Ramimtech conveyor belt repair strip is with features of high bonding strength and good wear-resistant etc. repair strip's back is with prefabricate half vulca
Fabric belt cover rubber Fabric belt cover rubber is widely used in mine，power plant，coal，ports，metallurgy，chemical and other fields.Ramimtech fabric belt cover rubber is made
Fabric Belt Tie Gum Ramimtech Fabric Belt Tie Gum is suitable for hot vulcanizing of fabric ply conveyer belt and mainly used in the curing process of conveyor belt hot splice. Brus
Fabric conveyor belt repair band Fabric conveyor belt repair band is a special material for repairing damage in conveyor belt ，such as scratches and pierce which often occurred in the
Heat-resistant vulcanizing tie gumvulcanizing tie gum,heat resistant tie gum,tie gumHeat-resistant vulcanizing tie gum,manufactured by RAMIMTECH, is made by special fire-resistant materials,and heatin
T2 Extruder Gun is mainly used to repair conveyor belt rubber surface damage and steel cord conveyor belt long
hot splice cement Usage of hot splice cement It is used when we make conveyor belt hot splicing joint.We need to apply it with the brush on the surface of uncured intermediate rubber
Hot vulcanizing adhesive for conveyor belt splicing Hot vulcanizing adhesive is mainly used for conveyor belt hot vulcanizing joints.It can significantly improve the bonding strength of the hot s
Aide
Ajouter á l'élu
Les marchandises remises
