L'anglais Le Russe L'allemand    |    Aide
   Ajouter á l'élu    Les marchandises remises
   
Description du produit
Équipement Industriel /  Autres Équipement Industriel /  Autres Équipement de Machines / 
Information sur le fabricant
Société :
AUTOSTRONG
 
Adresse :
4f, I Building, Huafeng High Tech Industry Zone, Nanhuan Rd. Haibin Rd.Crossing, Shajing Town, Shenzhen
 
Téléphone :
+86-755-26563358

.

1.ApplicationThe Tumbling Barrel Test simulates repeated falls which may occur to such devices as connectors or small remote control units which are normally attached to cables during use.The Tumbling Barrel Tester is the recommended instrument to perform such a test. A barrel is turned at a rate of five revolutions per minute resulting in ten falls per minute. The sample falls from a heightof 500mm on to a steel plate that is 3mm thickand backed by 19mm thick hardwood. The number of falls is set by the user in accordance to the standard they are meeting. After the tumble barrel procedure,the specimen is checked visually,mechanically, and electrically as prescribed in the relevant specification.
RéserverRéserver un produit site du fabricantSite du fabricant




D'autres marchandises de ce producteur :
Safety Testing Probe as per IEC60065 IEC61032 Test pin A/B/C/D ()
1.Application: Autostrong offers a wide range of test probe to meet the most common standards including those from IEC,EN,UL,GB and others. Such standards require the checking of accessibility to
Supply High Quality Salt Spray Test Chambers and Corrosion Test chambers ()
1.Description:Bo Nute principle draw salt water and then spray, atomization uniform, no crystallization of the blocking phenomenon, to ensure continuous testing, the compressed air nozzle on the way t
China Factory High Precision Electronic tensile testing machine ()
1.Specification:1kN,2kN,5kN,10kN,20kN,50kN,100kN,200kN,300kN,500kN,600kN, 100N,200N,500N,1000N,2000N , 100Nm,200Nm,500Nm,1000Nm  2.Application:The test machine is mainly suitable for rubber
China Factory Longterm Supply Spring Operated Impact Test Hammer as per IEC60068 ()
Spring Operated Impact hammers are used to check the durability of enclosures for electrical appliances of other electronic products.If damage occurs from the Impact Hammer test .Accessibility probes
China Factory Supply High quality IEC60068-2-75 Spring Operated Impact Hammer Te ()
1.Introduction:(1) IEC60068-2-75 Spring Impact Hammer is strictly designed according to IEC60068-2-75,GB/2423.55-2006.GB4706.1 and GB8898 standard.(2)After applying the impact with the hammer, the pro

"Autres Équipement de Machines":
Warping Machine
Warping Ma...
SUSHI Robot
SUSHI Robo...
Threading Screw Machine
Threading ...
Pencil Top Sharpner
Pencil Top...
3 Sides Stamping Machine
3 Sides St...
Industrial Fans
Industrial...
 
Copyright © 2006 - 2011 Asia.ru
 
eHouseHolding.com