Address: No.30-3, Lane 393, Yuantong Rd., Zhonghe City, Taipei County 235, Taiwan, Taipei, Taiwan
Phone: +886--227422715
8xE1 G.703 To Ethernet Converter (inverse Mux)
AN-8E1-ETH mux provides conversion from 1 to 8 E1 channels to Ethernet interface. Supports 1 to 8 E1 channels setting, it can detect the number of E1 channel and select available channel.If you need transmit you LAN over 8 x E1 lines, using some E1 G.703 access network - then this is your right solution! You will get 16 Mbit/s buy multiplexing 8 x E1 lines...The AN-8E1-ETH inverse multiplexers transmit up to 16 Mbps channel over multiple E1 links. They bridge the gap between E1 and E3, allowing bridges and routers to operate at their fastest rates. The AN-8E1-ETH have a built-in 10/100 Ethernet bridge with VLAN support for LAN-to-LAN applications over 8 E1 links. The AN-8E1-ETH fully meets all of the E1 specifications including G.703, G.704, G.706, G.732 and G.823. The unit features diagnostic capabilities for performing remote loopback tests.AN-8E1-ETH features:- Made according with IEEE 802.3, support 10Base-T,100Base-T.- Support flexible setting of 1 to 4 E1 channels, auto detect the number of E1 channels and time-delay, select available E1 channels when reset.- Provide 2 loop functions: Local E1 loop, remote E1 loop.- Ethernet transmission transparent, support AUTO-MDIX, straight and crossover auto-adapt.- Can transmit super-long frame of IEEE 802.1Q, support Ethernet exchanger with VLAN function.- Support E1 channel hot plug, and auto detect available E1 channels.- Support reset remote system from local system.8 E1 can have 10 ms time-delay, CRC alarm limitation can auto insulate bad-quality transmit channel by configuration, and is single direction insulation. When one direction error rate over limitation, cut only this direction, the other direction not affected. ( the two directions need not symmetry. )- Power supply option: AC220V, DC-48V. The positive and negative terminal can be exchanged for DC-48V, easy for installation and maintenance.- Network manager interface use SNMPOrdering informationAN-8E1-ETH/AC 8xE1-ETH interface convertor,75/120,220VAN-8E1-ETH/DC/48 8xE1-ETH interface convertor,75/120, DC-48VAN-8E1-ETH/DC/24 8xE1-ETH interface convertor,75/120, DC+24VAnd most important - even if 1 of E1`s goes down... Our mux reacts immediatelly by rebalancing load on left ones!Ask more info now...
AN-IC16G.703 rack mount balun panel lets you match the connectors, impedance and signal characteristics of up to 16 dual coax BNC connections (75 ohm) with up to 16 twisted pair connections (120 ohm).
AN-DS3/SM is a high-speed fiber optics modem that converts DS3 signal into optical data streamIt extends the transmission distance up to 100 kilometers. With the optional secondary optical link, AN-DS
AN-miniSDH-V - industries most compact SDH terminal multiplexer 4 E1 G.703 + 2xV35 and 1 Ethernet over STM-1AN-MINISDH-V is a compact SDH TM with STM-1 interface. It can connect with any standard STM-
The AN-FM-E1 are standalone and rack mountable fiber 1,x E1 fiber modems available in a number of different models, with AC or DC power supplies built-in.The AN-FM-E1 family of modems may be applied i
E1-V.35 convertor provide conversion between ITU-T G.703 standard E1 interface and standard V.35 interface, can receive synchronous 2.048 Mbps data, transfer it to router, DDN, multiplexer or other de
AN-E3 is an interface converter for E3 electrical and optical interface conversion. It is designed for the PDH equipment coaxial interface and optical interface interconnect.Complete loop - back facil
AN-4E1-ETH mux provides conversion from 1 to 4 E1 channels to Ethernet interface. Supports 1 to 4 E1 channels setting, it can detect the number of E1 channel and select available channel.If you need t
Maximum distance: Multimode;2km(Default), Single-mode;20km/(Default)40km/60km/80km/100km/120kmMedia converter complies with IEEE802.3 standards, It is designed to convert data signal between 10/100 Ba
Model name: AN-UM100Media converter complies with IEEE802.3 standards, It is designed to convert data signal between 10/100 Base-TX and 100 Base-FX fast Ethernet.The media converter is connected betwe
Likewise in category "Additional Equipment for Wire Networks":
help
Add to favorite
Favorite products
