Producer information
Company:
Apt Prosper Technology Co., Ltd. |
| |
Address:
21G, Caihui Building, Caihong Xindu, South Caitian Road, Futian, Shenzhen, Guangdong, China (Mainland) Zip: 518026 |
| |
Phone:
+86-755-82915951 |
|
CWDM Media Converter
Product Name: CWDM Media ConverterModel Number: APT-1124WS33/53OC CWDMPlace of Origin: ChinaName: 10/100/1000M self-adapt fiber optic media converterType: APT-1124WS33/53OCScale: 10/100/1000M CWDM media converterAPT-1124WS33/53OC gigabit self-adapt single fiber dual-direction fiber optic mediaconverter: single-fiber dual-direction fiber optic media converter can be used toEthernet`s electricity signal transmit to photosignal`s photoeletricity signal`stransceiver. The feature is use one fiber to transmit and receive photosignalin-phase. Less than dual-fiber media converter for one fiber but can enhance onedouble transmit energy, economization optical fiber cable resource.APT-1124WS33/53OC single mode single-fiber is 10/100/1000M self-adapt single fiberdual-direction fiber optic media converter. It`s completed according to IEEE802.3ab,IEEE802.3u, 10BaseT, 100BaseTX, 1000Base-TX, 1000Base-SX, and 1000Base-LXstandards.APT-1124WS33/53OC single mode single fiber is a single gigabit single fiber mediaconverter.Due to single fiber dual-direction media converter`s photosignal transmit wavelengthand receive wavelength are different, so must be used by pair. One TX and oneRX is one pair. Can`t be used wrongly or it will not work normally.Single modesingle fiber`s transmit photosignal wavelength is 1,550nm, receive photosignalwavelength is 1,310nm. Single fiber dual-direction media converter has one RJ-45interface and one SC single fiber interface, separated for twisted-pair and fiberto connecting. Single fiber media converter has 6 LED indicators, POWER, SPDFX1000,SPDTX1000, FX Link/Act, TX Link/Act, and Fdx.Technical parameters:1. Complies with IEEE802.3ab/z, IEEE 802.3u, IEEE 802.3X, IEEE802.1Q, 10BASE-T, 100BASE-TX,1000BASE-TX,1000Base-SX, and 1000Base-LX standards2. Supports TCP/IP, PPPOE, DHCP, ICMP, NAT protocol3. Flow control: full-duplex adopts IEEE802. 3X, half-duplex adopts backpressurestandard4. Electricity port supports auto-negotiation function, auto conditioning transmitmode and transmit speed5. Port supply auto-MDI/MDIX automatic reverse6. Supports storage transmit mode, cashe capability is 256K7. Supports electricity port`s 1,000M mode or self-adapt mode`s switch8. Supports state indicator, external power (output 5V 50Hz 1A)9. Interface: electricity port: RJ-45; fiber port: SC10. Twisted-pair: Cat5, Cat611. Single mode fiber: 8/125, 8. 3/125, 9/125um12. Working temperature: 0 ~ 50degree13. Storage temperature: -20 ~ 70degree14. Humidity: 5% ~ 90%15. Size: 140mm*110mm*30mm (L * W * H)Specifications:1. Connect type: SC2. Fiber type: single mode3. Wavelength: 1310/1550nm4. Typical distance: 20km5. Min. TX PWR: -6.0dBm6. Max. TX PWR: 0.0dBm7. Sensitivity:8. Link budget: 16.0dBmNotes:1. Optical port working mode is 10/100/1000M full duplex, LAN port is auto negotiation2. Twisted-pair interface initialization basis to check couple equipment`s statefor set self`s state; if can`t check out opponent state, that the state is uncertainty3. Strictly prohibit use unaided eye to look at the TX fiber transmit port when themedia converter is in electrifying state4. Please put dustproof cover on fiber interface, when the fiber optic media converteris not used5. When the product connecting with other equipment (router, switch, hub, NIC), theinterconnection equipment`s optic interface`s speed and mode must be consistent(multimode and single mode) (1000Base-SX/1000SX); interconnection equipment`sLAN port`s speed should mismatch
 Add to Basket
 Web address
|
help
Add to favorite
Favorite products
