GCK, GCL series low pressure shaft cabinet model switchbox are used forelectric motor control central, power distributing centre. They are applied topower stations, electric substations, buildings, edifices, airports, hospitals,industrial and mining establishments as three-phase 50Hz, voltage 380V andas follow electric system suited for the electricity, the feed, the illumination,the motor control and the power compensates. It conforms with the GB7251-97,ZBK36001-89 and IBC439-1 standards.GCK, GCL switchbox skeleton is made from "FA28" model material or "c" modellow-alloy channel steel. The main bus stood parallel to the top of cabinet, doorsealed by silicon adhesive tape, on the upper and lower part of cabinet havetrepanning for ventilation or heat exchanger systems.
GCK, GCL series low pressure shaft cabinet model switchbox are used forelectric motor control central, power distributing centre. They are applied topower stations, electric substations, buildings, ed
Metal enclosures are made from continuous sheet steel double folded at the front,with back welded to the frame and internally with polyester epoxy resin paint. Theseenclosures are with transparent tem
Metal enclosures are made from continuous sheet steel double folded at the front,with back welded to the frame and internally with polyester epoxy resin paint. Theseenclosures are with transparent tem
Metal enclosures are made from continuous sheet steel double folded at the front,with back welded to the frame and internally with polyester epoxy resin paint. Theseenclosures are with transparent tem
Detailed Product DescriptionMetal enclosures are made from continuous sheet steel double folded at the front,with back welded to the frame and internally with epoxy system treatment. The enclosure wit
Metal enclosures are made from continuous sheet steel double folded at the front,with back welded to the frame and internally with epoxy system treatment. The enclosurewith rubber gaskets inside door
Metal enclosures are made from continuous sheet steel double folded at the front,with back welded to the frame and internally with epoxy system treatment. The enclosurewith rubber gaskets inside door
Metal enclosures are made from continuous sheet steel double folded at the front,with back welded to the frame and internally with epoxy system treatment. The enclosurewith rubber gaskets inside door
All kinds of outer door type enclosures and indoor enclosures can be manufactured by us, if there are any similar needs, kindly please mail us directly.
help
Add to favorite
Favorite products
