European (ABB) System Transparency Distributing Box
TSP(R) Series Lighting Distribution Box fully conforms to IEC-493-1 criterion, Good-Looking, Endurable and safe, it is widely used as a power Distribution System for Factory, Mansion, Residential House, Emporium, etc.The Shell and Bracket of it is made from 1.00mm high quality galvanized Steel Sheet, spraying with Smooth Powder Paint, mixed with ABS plastic rim and transparent cover, which using for monitoring the Elec. components in the Box. There are holes in the upside and downside, you can install the electric line flexibly, the protective category reach to IP20.TSP(R) Series Lighting Distribution Box Can install MG, ABB, Siemens, or other MCBs.The Unique Connecting Methods between The Din Rail and the Box, so the Din Rail and CBs can rotate at the same time.The Construct Structure of the Box perfectly saved the Spaces inside the box and fully saved the costs as well.TSP(R) Series Lighting Distribution Box always use for the control, load, Leak and short-way protection of Power, Lighting or Motor, which is not over than 50-60Hz, 600V, Loading Currency not over than 100A, Single or Three Phase.Normally, The Bottom of the Distribution Board use a Connecting Bank for co-connecting, and all the Connecting Bank would be provided by us, what we need customer to provide is the Electrical System Diagram.For the sake of fully protection., there are Neutral and Earthing Rails Inside of the Box!The box can mount and arrange 7 Way, 10 Way, 12 Way, 16 Way, 20 Way Breakers, each single pole for 1 Way; Double Pole Leakage Breakers for Two Way, and 4 Pole Leakage Breakers for 4 Way.Using Condition:1. General Temperature: Not over than +40°C, Not less than -20°C.2. Altitude height not over than 2500M3. Relative Humidity: Not over than 90%.4. Without dust, fire, Corrosion or other dangerous items around
GCK, GCL series low pressure shaft cabinet model switchbox are used for electric motor control central, power distributing centre. They are applied to power stations, electric substations, buildings,
GCK, GCL series low pressure shaft cabinet model switchbox are used forelectric motor control central, power distributing centre. They are applied topower stations, electric substations, buildings, ed
GCK, GCL series low pressure shaft cabinet model switchbox are used forelectric motor control central, power distributing centre. They are applied topower stations, electric substations, buildings, ed
Product DescriptionMetal enclosures are made from continuous sheet steel double folded at the front,with back welded to the frame and internally with polyester epoxy resin paint.These enclosures are w
Product DescriptionMetal enclosures are made from continuous sheet steel double folded at the front,with back welded to the frame and internally with polyester epoxy resin paint.These enclosures are w
Metal enclosures made from a continuous length of sheet steel double folded at the front, with back welded to the frame and internally with polyester epoxy resin paint. They are enclosures with transp
Likewise in category "Other Electronic Components":
help
Add to favorite
Favorite products
