Address: West Block,3/F,Building 2,Jiuxiangling Industrial Zone,Xili Town, Nanshan, Shenzhen, Guangdong, China (Mainland) Zip: 518055 &am
Phone: +86-755-26702668
Universial USB to 4 Port RS485 Converter
1, Plug and play compliant, hot swappable2, Add 1 to 4 serial ports3, Multi-interface RS-485 model4, USB 1.0 and 1.1 compliant; USB 2.0 backwards compatible5, USB port powered- no external power needed on USB to serial modelsStandard Accord USB1.1 or 2.0, EIA RS485 standardUSB signal VCC, DATA+, DATA-, GND, FGRS485 signal RX, TX, GNDAsynchronism, point to point or multi-pointBand rate 300-115200bps, automatic test signal rateTransmission RS485 side 1500M, USB side less than 5M600W sugre protection, 15KV static electrity protectionUSB side type A interrface female, RS-485 side DB-9 maleWorking temperaature -20 to 60Storage temperature -25 to 85humidity Relatively humidity 5% to 95%Input powered Powered from USB or 5V external poweredconsumption Static consumption less than 80mA,dynamic average consumption less than 150mAL*W*H 245mm*90mm*38mmShell IronColor BlueWeight 500g
MODEL7304 Optic Modem converts V.35 electrical signal into optical data stream for transport over single mode or multi mode fiber optic cables. At the opposite end of the fiber, the optical stream is
1,Using E1 line lucency transfer Ethernet data2, Support N*64Kbps (N=1-32) rate3, Support local clock and line clock4, E1(G.703)interface support 120ohm(RJ-45)and 75ohm(BNC double coaxial)5, Ethernet
The Gigabit Ethernet media converter fully complies with IEEE802.3 and IEEE802.3z standards. The twisted pair and the fiber-optic both transfer data at the rate of 1000Mbps. With single-mode fiber-opt
Product Name: 16-Port RS232 or RS485/422 Serial ServerModel Number: NP315Place of Origin: China1, Auto-detecting 10/100Mbps Ethernet2, 8 port RS-232 or RS422/485 serial interfaces3, Supports Windows N
1, Auto-detecting 10/100Mbps Ethernet2, 4 port RS-232 or RS422/485 serial interfaces3, Supports Windows Native COM drivers with automatic network connection recovery4, Built-in Ethernet and TCP/IP pro
Product Name: Converter (RS232 / RS485)Model Number: TLC485Place of Origin: ChinaTLC485 converts RS-232 into RS-485 signals. All are port powered and feature automaticsend data control. SDC automatica
MODEL7301 Optical Optic Modem converts E1 electrical signal into optical data streamfor transport over single mode or multimode fiber optic cables. At the oppositeend of the fiber, the optical stream
Product Name: E1 to 10/100M Protocol ConvertersModel Number: MODEL7211Place of Origin: Sheznzhen1) Using E1 line lucency transfer Ethernet data2) Support local clock and line clock3) Support pretend r
1) Using E1 line lucency transfer Ethernet data2) Support local clock and line clock3) Support pretend random coding loop test4) E1(G.703) interface supports 120Ω (RJ-45) and 75Ω (BNC double
Likewise in category "Additional Equipment for Wire Networks":