Address: West Block,3/F,Building 2,Jiuxiangling Industrial Zone,Xili Town, Nanshan, Shenzhen, Guangdong, China (Mainland) Zip: 518055 &am
Phone: +86-755-26702668
V.35 Optic Fiber Modem
MODEL7304 Optic Modem converts V.35 electrical signal into optical data stream for transport over single mode or multi mode fiber optic cables. At the opposite end of the fiber, the optical stream is converted back into electrical signals of the appropriate interface such as G.703 & V.35. This fiber optic modem extends the transmission distance up to more than 100Km. The frame format of MOD-V.35 is frame/unframe for E1, so it can be used to transmit E1 signal of frame video or unframe video1, Lucency transfer V.35 protocol2, Support N*64Kbps (N=1-32) rate3, Choice ST, FC, SC optic fiber connector4, Support optic port line clock, local clock, equipment clock5, Multi-mode 2KM, signal-mode 20KMInterface signal Accord CCITT V.35 standardOptic fiber signal TX, RXAsynchronism, lucency transferV.35 port rate N*64Kbps(N=1-32)Optic port rate 8.192MbpsOptic port coding CMIOptic fiber wavelength Multi-mode 850nm, signal-mode 1310nmOptic port transmission Multi-mode 2KM, signal-mode 20KMInterface proetection 600W surge protection , 15KV static protectionV.35 port type DB-25 female or M/34 femaleOptic port type Multi-mode adopt ST connector, signal-mode adopt FC/SC connectorWorking temperature -25 to 70Storage temperature -40 to 85Humidity Reality humidity 5% to 95%Input power 220VACConsumption 2.5WL*W*H 227mm*147mm*42mmShell PlasticColor BlackWeight 280g
1,Using E1 line lucency transfer Ethernet data2, Support N*64Kbps (N=1-32) rate3, Support local clock and line clock4, E1(G.703)interface support 120ohm(RJ-45)and 75ohm(BNC double coaxial)5, Ethernet
The Gigabit Ethernet media converter fully complies with IEEE802.3 and IEEE802.3z standards. The twisted pair and the fiber-optic both transfer data at the rate of 1000Mbps. With single-mode fiber-opt
Product Name: 16-Port RS232 or RS485/422 Serial ServerModel Number: NP315Place of Origin: China1, Auto-detecting 10/100Mbps Ethernet2, 8 port RS-232 or RS422/485 serial interfaces3, Supports Windows N
1, Auto-detecting 10/100Mbps Ethernet2, 4 port RS-232 or RS422/485 serial interfaces3, Supports Windows Native COM drivers with automatic network connection recovery4, Built-in Ethernet and TCP/IP pro
Product Name: Converter (RS232 / RS485)Model Number: TLC485Place of Origin: ChinaTLC485 converts RS-232 into RS-485 signals. All are port powered and feature automaticsend data control. SDC automatica
MODEL7301 Optical Optic Modem converts E1 electrical signal into optical data streamfor transport over single mode or multimode fiber optic cables. At the oppositeend of the fiber, the optical stream
Product Name: E1 to 10/100M Protocol ConvertersModel Number: MODEL7211Place of Origin: Sheznzhen1) Using E1 line lucency transfer Ethernet data2) Support local clock and line clock3) Support pretend r
1) Using E1 line lucency transfer Ethernet data2) Support local clock and line clock3) Support pretend random coding loop test4) E1(G.703) interface supports 120Ω (RJ-45) and 75Ω (BNC double
E1/V.35 G.703/E1 interface converter supports the conversion between E1 interfaces which accord with the ITU-T G.703 standard and V.35 interface. It can receive synchronous data of 2.048Mbps from E1 n
Likewise in category "Additional Equipment for Wire Networks":