French |

Description

Repair & Construction / Bilding instruments / Pneumotool /

Zoom in

Send Request

Producer information

Company:
ZHONG CHENG HARDWARE CO., LTD.

Address:
1F, No.7, Jing Ming 2 Street, Taichung

Phone:
+886-4-23207766

Air Micro Die Grinder

collect size::1/8``, 3/32`` ()free speed: 54,000 rpm ()operation pressure: 6.2bar ()air inlet: 1/4`` ()weight: 0.3kg () () () ()

Other goods of this manufacturer :

Air Saw
	stroke length: 10mm ()cutting capacity: 1.6mm ()free speed: 9000rpm ()operation pressure: 6.2bar ()air inlet: 1/4`` ()weight: 1.0kg () () ()

Cut Off Saw
	Blade diameter: 355mm ()Hole diameter: 25.4mm ()Input: 110-230V/50-60Hz ()No load speed: 3900 rpm ()Constructure: with switch lock for continuous operation,all ball ()Bearing construction,additional

Gasoline Generator
	voltage: 115V-230V ()DC output: 12V/8.3A ()max output: 660VA/50Hz, 800VA/60Hz ()operating hours: 3.5HR/50Hz, 2.8HR/60Hz ()engine: Robine brand EY08 ()weight: 21kgs () () ()

Smoke Detector
	Operation voltage: 9V battery ()Battery low: beep tone 1 munite ()Alarm: 85db ()With test button function ()Battery misplact protection ()Temperature range: 4-40C ()Dimension: dia.100 x 30mm ()For ki

1/2`` Impact Wrench Kit
	1pc 1/2`` impact wrench ()10pcs socket ( 9-27mm ) ()1pc 5`` extension bar ()1pc 4mm hex key ()1pc nipple ()1pc oil pot ()1pc mini olier ()1pc blow case ()

1/2`` Industrial Impact Wrench
	Mechanism: twin hammer ()Free speed: 7000rpm ()Operation pressure: 6.2bar ()Max torque: 678 Nm ()Air inlet: 1/4`` ()Weight: 2.7KG () () ()

1/2`` Pro Air Impact Wrench Kit
	1.High power torgue. 2.Well balance on working. 3.Professional hammerfor Coating. 4.Printing Coating. 5.Longer lifetime.

1/2`` Reversible Air Drill
	mechanism: full cage gear ()free speed 500 RPM ()reversible ()operation pressure: 6.2bar ()air inlet: 1/4`` ()weight: 1.8kgs () () ()

1/4`` Soclcet Tool Set
	1.CR-V material. 2.High forqul. 3.Printing socket. 4.Professional carry box. 5.Full range size soclce tool. 6.Forever guaramter.

Likewise in category "Pneumotool":