Address: A Zone, Industrial Development Zone, Huangjiabu Town, Yuyao, Zhejiang, China (Mainland) Zip: 315415
Phone: +86-571-87632409 +87632431
2" LED Down Light, Low Profile
Features:1) Newly designed Low Profile LED Down light is particularly suitable to moreapplications where the depth of cut-out hole is limited.2) Highly polished 304 stainless steel, TIN (Titanium Nitrite) plated brass, or whitepowder coated aluminum down light with clear PC lens. Lens is specially designedto distribute light illuminated from white LED`s3) Two bare end lead wires, each 6" long4) Circuit board completely sealed in epoxy to resist water, corrosion and vibration5) 18 LED`s is the approximately equivalent brightness of a 7 watt halogen bulb ata rated 12V6) Draws less current for saving power consumption7) Rated at 12V and is operative at 13.8V8) Super long life span up to 100,000h
Features:1) 9 LEDs of φ5.0mm, or 3 superflux LEDs, superbright.2) PC lens and housing, PVC grommet3) Housing and lens sealed by sonically welding to ensure a permanent and waterproof seal4) Right
Features:1) 9 LEDs of φ5.0mm, or 3 superflux LEDs, superbright.2) PC lens and housing, PVC grommet3) Housing and lens sealed by sonically welding to ensure a permanent and waterproof seal4) Right
Features:1) 12 LEDs of φ5.0mm, or 3 superflux LEDs, superbright2) PC lens and housing, PVC grommet3) Housing and lens sealed by sonically welding to ensure a permanent and waterproof seal4) Right
Features:1) 12 LEDs of φ5.0mm, or 3 superflux LEDs, superbright2) PC lens and housing, PVC grommet3) Housing and lens sealed by sonically welding to ensure a permanent and waterproof seal4) Right
Features:1) 2 Superflux LEDs2) PC lens and base sealed by sonically welding to ensure a permanent and waterproof seal3) Surface mount by 2 fastening screws4) Rated 12V designed at 13.8V5) DOT/SAE appr
Features:1) 2 Superflux LEDs2) PC lens and base sealed by sonically welding to ensure a permanent and waterproof seal3) Surface mount by 2 fastening screws4) Rated 12V designed at 13.8V5) DOT/SAE appr
Features:1) Die-cast aluminum housing finished with pearl silver annodizing, or other finish atoption. Standard MR11 bulb in LEDs Installed2) Standard MR11 socket included3) Draws less current and gen
Features:1) Die-cast aluminum housing finished with pearl silver annodizing, or other finish atoption. Standard MR11 bulb in LEDs Installed2) Standard MR11 socket included3) Draws less current and gen
Features:1) 8 LEDs of 5.0mm, superbright2) PC lens and housing, optional black or grey ABS base mount with snap-lock function3) Housing and lens sealed by sonically welding to ensure a permanent and w
help
Add to favorite
Favorite products
