Russian

German

French |

help

Add to favorite

Favorite products

Description

Communication / Network / Telephony Products / Equipment for Wired Networks / Additional Equipment for Wire Networks /

Cat5 Inter-Connection Modules ( 10p / 20p / 25p ) (Cat5 Inter-Connection Modules (10P / 20P / 25P))

Zoom in

Producer information

Company:
Nanjing Huamai Technology Co., Ltd.

Address:
No.11 Runfa Road,Dongshan Street Industry Concentrative Zone, Jiangning, Nanjing, Jiangsu, China (Mainland) Zip: 211103 &nbs

Phone:
+86-25-52707128

Cat5 Inter-Connection Modules ( 10p / 20p / 25p )

It adopts the insulating displacement connection (IDC) technology.There is 45 degrees between reed and wire. The touch point between reedand reed can not be cut when contact.The transmission performance for the module accords with ISO11801 forCat5. It is suitable for high-frequency data signal transmission. Thewhole performance meets the requirement of Korea KT.Technical Performance:1) Insulation resistance: >1,000M ohms, 500V DC2) Dielectric strength: >1,000V DC, 1min3) IDC contact resistance:4) Wires applicably: 0.4 ~ 0.7mmTransmission Performance(100MHz):1) Next crosstalk ratio: >40dB2) Return Loss: >20dB3) Attenuation:4) Impedance: 100±2 ohmsMaterial Performance:1) Plastic material: all the plastic parts use flame retardant material,the flame retardant capability reaches level FV-02) High-performance tin bronze, Cu+P+Sn>99.7%

Add to Basket

Web address

Other goods of this manufacturer :

CDMA Base Station Duplexer

CDMA Base Station Duplexer
	Product name:CDMA Base Station DuplexerSpecification

Communication Optical Cable Joint Closure
	Technical parameters:1) Ambient temperature: -40 ~ +55°C2) Atmospheric pressure: 70KPa~106KPaFeatures:1) Passing-by function without breaking optical fiber core2) Can be used repeatedly3) Case bod

Connection (Disconnection) Module
	Features:1) Reed armature plated with silver, 0.4 - 0.6mm conductor can bespliced, the number of times of IDC is greater than 2002) Contact resistance (body resistance not included): ≤2.5m ohms

Disconnection Modules (10P)
	It adopts the insulating displacement connection (IDC) technology.There is 45 degrees between reed and wire. The touch point between reedand reed can be cut when contact. It can be install the protect

Double-Contact IDC Main Distribution Frames
	Features:1) Reeds adopt separate double-contact structure with angle2) Excess voltage and current protection3) Three levels acoustic-optic alarming mode4) Modular design, flexible configuration5) Full

Fiber Adapters
	Specifications:1) Insertion loss:2) Keeping force: 2~6N3) Reportable:4) Working temperature: -40 ~ 80oC5) Changeability:6) All kinds of optical fiber connector products available includingadapters, fi