Russian German French    |    help
   Add to favorite    Favorite products
   
Description
Communication / Network / Telephony Products /  Equipment for Wired Networks /  Additional Equipment for Wire Networks / 
Producer information
Company:
Nanjing Huamai Technology Co., Ltd.
 
Address:
No.11 Runfa Road,Dongshan Street Industry Concentrative Zone, Jiangning, Nanjing, Jiangsu, China (Mainland) Zip: 211103 &nbs
 
Phone:
+86-25-52707128

Protection Module


It has excess voltage and current protection function, also has overload to earthingfunction. We use the three electrodes gaseous discharge tube and high polymerPTC as the protection component. The whole performance meets the requirement ofKorea KT.Technical Performance:1) Insulation resistance: >1000M Ohm2) Bound of limited voltage: 180~300V3) Capability of bearing alternating current: 5A, duration 1s, 5 times, interval 3minonce4) Capability of bearing dash current: 100A; 10/1000us waveform, 300 times, interval3min once5) Fail-safed current: 250mA6) Over current action time:7) Unactivated current: 150mAMaterial Performance:1) Plastic Material: all the plastic parts use flame retardant material, the flameretardant capability reaches level FV-0;2) High-performance tin bronze, Cu+P+Sn>99.7%

Add to BasketAdd to Basket Web addressWeb address



Other goods of this manufacturer :
Rj45 & Rj11 Jacks
 Rj45 & Rj11 Jacks ( Rj45 & Rj11 Jacks)
Features:1) Contact resistance (body resistance not included):normal atmosphere2) Insulation resistance: ≥1,000M ohms under normal atmosphere3) Dielectric strength: DC 1,000V (AC 700V) (no break-do
Safety Belt Stems
 Safety Belt Stems ( Safety Belt Stems)
Features:1) Structure: tie-in and cable joint stema) Surface anti-erosion capability: ASTM B117-85, spray-plastic part ≥50 hours,zincification part (color or black) ≥72 hoursb) Pull streng
Seat Stem
 Seat Stem ( Seat Stem)
We can supply various stems for automotive parts.
Terminal Splicing All-in-One Tray
 Terminal Splicing All-in-One Tray ( Terminal Splicing All-in-One Tray)
Features:1) Dimensions (H x W x D): 27 x 300 x 200mm2) 12 fiber cores
Auto Parts
Features:1) Structure: tie-in and cable joint stema) Surface anti-erosion capability: ASTM B117-85, spray-plastic part ≥50 hours,zincification part (color or black) ≥72 hoursb) Pull strength: &g
Patch Panel
Features:1) Insulation resistance: >1,000MΩ, 500V DC2) Dielectric strength: >1,000V DC, 1 min3) IDC contact resistance:4) Wires applicably: 0.4 - 0.6mm5) Plastic material: all the plastic parts u
Automotive Stamping
 Automotive Stamping ( Automotive Stamping)
We can supply various stamping automotive parts.
Bend Tube
 Bend Tube ( Bend Tube)
Various bend tube used as automotive parts are available.
Cat5 Disconnection Modules
 Cat5 Disconnection Modules ( Cat5 Disconnection Modules)
It adopts the insulating displacement connection (IDC) technology.There is 45 degrees between reed and wire. The touch point between reedand reed can be cut when contact.The transmission performance f

Likewise in category "Additional Equipment for Wire Networks":
LAN Cable Testers
LAN Cable ...
Lan Cable Tester
Lan Cable ...
 Caulking Gun
Caulking ...
 Caulking Gun
Caulking ...
 3pc Flaring Tool Set
3pc Flari...
 Craft Beads Set
Craft Bea...
 
Copyright © 2006 - 2011 Asia.ru
 
eHouseHolding.com