|
SWITCHES
The Dynamix DC-48A/SA is a 48-port IP-based DSL Access Multiplexer that provides ADSL access to CPE (consumer premise equipment) ADSL modems/routers at the subscribers side. This DSLAM connects to the network service provider`s network through its Ethernet interface. Using the latest ADSL/ADSL2/ADSL2+ technology, this IP DSLAM provides carriers a very cost-effective solution to offer their subscribers with features such as bandwidth management, traffic prioritization and data flow security control. Technical Specifications: Device Ports 48 ADSL/ADSL2/ADS2+ ports (2 RJ-21 Telco-50 connectors) 48 splitter ports (2 RJ-21 Telco-50 connectors) 1 10/100/1000BASE-T copper Gigabit port 1 1000BASE-LX fiber Gigabit port 1 10/100BASE-TX Ethernet port 1 RS-232 console port Protocol Handling Capability 8 VCs per DSL por 128 MAC addresses per DSL port 2K Multicast MAC addresses 512 VLAN (any value in 4096) Configurable packet size: 64 bits to 1542 bits ATM MIB RFC 1514, 2515 Definitions of Managed Objects for ATM Management ADSL/ADSL2/ADSL2+ Interface Downstream DMT data rate from 32Kbps to 10.5Mbps Upstream DMT data rate from 32Kbps to 1Mbps Standard compliance: ITU G.992.1 (G.DMT), G.DMT.bis, ITU G.992.2 (G.Lite), ANSI T1.413 issue 2, ITU G.994.1 (G.handshake) for ADSL, G.992.3 for ADSL2, G.992.5 for ADSL2+ Extended power management capability to optimize power consumption for each application Maximum cable distance from DSLAM to subscriber CPE: 6.1 km Management Microsoft NT/SNMP-based GUI EMS Local RS-232 CLI and Ethernet SNMP/Telnet management Remote in-band SNMP/Telnet management SNMP v.1, v.2c, v.3 Up to 8 Dyanmix DC-48A/SA cascaded units manageable as one single unit Firmware Upload/Download Through FTP or TFTP Protocol STP, IGMP snooping, GMRP, GVRP, LACP, LACP marker, SNMP/UDP/IP/MAC/Ethernet
Add to Basket
Web address
|