Address: 4F, 31, Alley 4, Lane 36, Min Sheng E. Rd., Sec. 5, Taipei
Phone: +886-2-27665753
PCI 12 BIT DATA ACQUISITION
32 bits PCI bus with Plug and Play (PnP) features. Programmable I/O control functions. Provides 16 A/D channels and the resolution is 12 bits. Provides 2 D/A channels and the resolution is 12 bits. Unipolar or bipolar selectable. Input voltage range from 0 to 10V or 0 to 20V for unipolar, and from V5V to 5V or V10V to 10V for bipolar. Provides 1 digital input/digital output channels and the resolution is 16 bits. Provides three 16 bits counter to trig A/D conversion. Provides software, external hardware signal or internal counter to trig A/D conversion. By using sampling and hold to get A/D signals. Interrupt or polling driven selectable. Gain control factor selectable from 1 to 8.
32 bits PCI bus with Plug and Play (PnP) features. Programmable I/O control functions. Provides 16 A/D channels and the resolution is 14 bits. Provides 2 D/A channels and the resolution is 14 bits. D
32 bit PCI bus with Plug and Play (PnP) features. Two RS232 ports or RS422 or RS485 ports for asynchronous communications. Suitable for SCO UNIX, Linux, MS/DOS, WINDOWS NT/2000/XP, WINDOWS 95/98/ME,
32 bit PCI bus with Plug and Play (PnP) features. Four RS232 ports or RS422 or RS485 ports for asynchronous communications. User can set different communication mode (RS232, RS422 or RS485) for each
32 bit PCI bus with Plug and Play (PnP) features. Eight RS232 ports or RS422/RS485 ports for asynchronous communications. Suitable for SCO UNIX, Linux, MS/DOS, WIindows NT/2000/XP, Windows 95/98ME, M
32 bits PCI bus with Plug and Play (PnP) features. Support 16 photo couple input/output channels. Allow the photo input/output signals to be completely floated and prevent the ground loops. 16 LED co
32 bits PCI bus with Plug and Play (PnP) features. Programmable I/O control functions. Up to 192 I/O lines. Up to 6 counter/timer. Maximum of 10 MHZ counter rate. Support several operating modes that
Watchdog timer that can be set from 500ms to one hour or what ever you need to set the timer via software control. One externally visible LED shows the status of watchdog card. LED lights after gener
Standard EIA RS232 to RS485 converter interface. Photo isolator function that prevents signals up to 1000V. Transmission distance up to 1200m. Female RS232 connector. Male RS485 connector. 9V, 500mA
32 bits PCI bus with Plug and Play (PnP) features. Support 16 relay output channels and 16 photo couple input channels. Max contact rating for relay: 70V/AC, 100V/DC 0.25AMP. Response time for relay:
help
Add to favorite
Favorite products
