Russian

German

French |

help

Add to favorite

Favorite products

Description

Electronic Components & Parts / Electro-Adjusting Components & Materials / Print Circuit Board Components /

SMT Miniature Jack (SMT Миниатюрные Джек)

Zoom in

Send Request

about this service

Producer information

Company:
KYOYAKU ENTERPRISES LTD.

Address:

Phone:
+886-2-89191289

SMT Miniature Jack

SMT Miniature Jack with Relative Humidity of 60% to 70% Standard atmospheric conditon: Unless otherwise specified, the standard range of atmosperhic conditions for making mearuements and tests are as follows: Ambient temperature: 15 to 35 degrees Celsius Relative humidity: 25% to 80% Air pressure: 86 to 106kPa If there is any doubt about the results, measurements shall be made with in the following limits: Ambient temperature: 20 2 degrees Celsius Relative humidity: 60% to 70% Air pressure: 86 to 106kPa Mechanical characteristics: Insertion force: Conditions: measurement shall be made after insertion and withdrawal using standard plug gauge three times Spec.: 3 ~ 20N (0.3 ~ 2.0kgf) Withdrawal force: Conditions: measurement shall be made Termial strength: Conditions: a static force of 500gf being applied in one direction on the tip of terminal for 1 min. Spec.: There shall be no sign of damage mechanically and electrically. Electrical characteristics: Rating: Spec.: 30V DC 0.5A Contact resistance: Conditions: 1kHz measured at small current (1A or less) Spec.: 30m Ohms or less Insulation resistance: Conditions: A voltage of 500V DC shall be applied for a min. Between conductors which should not make contact under normal conditions after which measurement shall be made Specification: 100M Ohms minimum Dielectric strength: Conditions: between conditions which should not make contact under normal conditions. 500V AC (50 to 60Hz) 1 minute (trip current 2mA) Specification: without distinct damage Endurance characteristics: Solderability: Specification: a new uniform coating of solder shall cover a minimum of 75 of the surface being immersed Dry heat/humidity/cold: Specification: Contact resistance 150m Ohms maximum Insulation resistance. 150M Ohms minimum There shall by no sign of damage mechanically and electrically

Add to Basket

Web address

Other goods of this manufacturer :

SMT Miniature Jack
	SMT Miniature Jack with Insertion Force of 3 to 20N Standard atmospheric conditon: Unless otherwise specified, the standard range of atmosperhic conditions for making mearuements and tests are as fo

SMT Miniature Jack
	SMT Miniature Jack with Air Pressure of 86 to 106kPa Standard atmospheric condition: Unless otherwise specified, the standard range of atmosperhic conditions for making mearuements and tests are as

SMT Miniature Jack
	Standard atmospheric conditon: Unless otherwise specified, the standard range of atmosperhic conditions for making measurements and tests are as follows: Ambient temperature: 15 to 35 degrees Celsius

SMT Type Telephone Jack
	Standard atmospheric condition Unless otherwise specified, the standard range of atmospheric conditions for making measurements and tests are as follows: Ambient temperature: 15 to 35 degrees Celsius

SMT Type Telephone Jack
	Standard atmospheric condition Unless otherwise specified, the standard range of atmospheric conditions for making measurements and tests are as follows: Ambient temperature: 15 to 35 degrees Celsius

3 x RCA and S-Jack
	Standard atmospheric condition: Unless otherwise specified, the standard range of atmospheric conditons for making measurements and tests are as follows: Ambient temp.: 5 to 35 degrees Celisus Relati

3 x RCA and S-Jack
	Standard atmospheric condition: Unless otherwise specified, the standard range of atmospheric conditons for making measurements and tests are as follows: Ambient temp.: 5 to 35 degrees Celisus Relati

3 x RCA and S-Jack
	Standard atmospheric condition: Unless otherwise specified, the standard range of atmospheric conditons for making measurements and tests are as follows: Ambient temp.: 5 to 35 degrees Celisus Relati

DC Power Jack
	Scope: This specification applies to unified polarity type DC jack used in electronic equipment. For DC input use Stadard atmospheric conditions: Unless otherwise specified. The standard range of atm

Likewise in category "Print Circuit Board Components":

memory car...

``D`` Conn...

Camera con...

Keystone J...

Taiwan.ru service usage rules

eHouseHolding.com