Automatic galvanised wire rope cutter sealer, its design is mainly aimed at problem from production and processing industries that a variety of lead-sealed wire rope,wire rope lock, sealing wire rope, blockade and so on batches of wire ropes after fusing, grinding and resolving the unstable quality of manual processing, a variety of processes, and increasingly serious labor difficulties, this fully automatic equipment can help save human labor, simplify the processing procedures, to reduce production costs and increase production capacity, multiple machines can be managed by one person at the same time. This equipment is widely used in medical equipment, auto parts, construction safety, office furniture, bicycles, sports equipment, locks and other industries. The high-precision touch-type computer control system makes the setting and changing of the fuse conditions easy, and good fuse quality can be obtained.Main technical requirements and instructions 1. The wire rope of the wire rope having a diameter of 1-5 mm which can be completed by the fuse machine.The equipment adopts the stepper motor (8mm above adopt servo motor) to ensure the fuse length is accurate,the melting section is conical,the largest circular surface diameter of the conical surface is smaller than the diameter of the steel wire,and the melting section is not scattered.it is quick and convenient to change the fuse length by using the touch screen. 2. Size requirements for wire rope and fuse: A.The fuse material is a wire rope with no cotton inside. B.The wire rope diameter is required to be 1-5mm (requires replacement of the clamping die). C.The maximum wire diameter that can be blown is 5mm and the length is not limited. (If larger diameter material processing is required, it needs to be customized separately). D.The fuse length size can be touched on the touch screen by the “Total Length”display box,pop-up digital setting keyboard and the length can be set arbitrarily. E.Wire break accuracy is approximately +/-0.060 inch- +/-0.500 inch. 3. Feature: Voltage:380V+220V Air Source:0.4MPa Size:80x80x150cm Wire Diameter:1-5mm Cutting Length:10cm To 30m Lanuage:English/Chinese
Model No.SWT508-ZW6 (ZW16)RemarkShortest bending distance is 2.5mm. Bending Angle: clockwise or anticlockwise bending at 30/45/60/90 degree.PowerAC220/ 50HZMotorRated 650WDisplayEnglish/Chin
Model No.SWT–508ESWT508-JESWT508-JE2PowerAC220/ 50HZMotorRated 300WRated 500WDisplayEnglish/ChineseCutting Length1-9999 mmStripping Length (mm)Wire Head 0-35Wire Tail 0-15Wire Head 0-50Wire
This 12k crimps/hour 1.5T ribbon cable crimping machine can replace the OTP transverse die arbitrarily,simpler than the old model, fast debugging,output can reach 12000 pcs per hour. It adopts new N
This benchtop wire splice machine is specially designed for wire riveting processing, pressing riveting and wire connection. It has replaced the traditional soldering methods
1.8T New Style Semi-Automatic Brass Strip Splicing MachineThis semi-automatic wire splice machine is specially designed for wire riveting processing, pressing riveting and wire connection. It has
LB-2.0T automatic feeding mute wire splice band machine.Special note:1. Energy saving and low noise.2. The mechanical shape design conforms to the CE standard and has high safety performance.3. Digita
This 3F pneumatic wire stripper is a bench top multi conductor wire stripping machine specialized for removing insulations of multicore wires 32awg-18awg of power cord, shielded wire, data cable, te
Likewise in category "Electronic Components Manufacturing Equipment":
help
Add to favorite
Favorite products
