Single-cylinder Pre-heater
Hot melt spray road marking paint is melted to 190-200 degrees Celsius in the road marking preheater, its construction in the road marking coating to form a uniform thickness in the molten state using a dedicated hot melt road marking sprayer after cooling, the consolidation turn in the road. Hot melt spray road marking fluidity in the molten state, the construction process through high-speed rotating equipment roller construction of the molten coating evenly on the pavement, hot melt road marking paint sprayed per square meter dosage of 3kilograms, paint fluidity the good opposite sprinkle glass beads, strong adhesion, good performance at night reflective. Sprayed hot melt road marking paint construction equipment on the material roller off the ground, paint roller throw molding at the pavement, so the amount of coating per unit area and the flatness of the road basically irrelevant, therefore, the heat the melt spraying road marking coating suitable for the rough road and the low level of road maintenance and construction. On the highway, the traffic is heavy, the vehicle changing lanes frequently wear dotted line bisection lane, a relatively small amount of hot melt spraying road marking paint unit area, paint thinner coating is not suitable for cars traffic road and highway divided into lanes dotted line; RCC less suited to the vehicle, wear lower the sideline. The sideline just play a guiding role in high-speed driving, sprinkle glass beads reached the standard required in the face, a good night reflective oriented role. Yuantai highway sideline use hot melt spray road marking paint than the amount of hot-melt the Scratch-type road marking paint unit area will save 25% to 30%.
Zhengzhou Dayu Machinery Co., Ltd. is a leading road marking equipments manufacturer and supplier in China. Dayu road marking machines include many different types, such as dy-ssal driving type cold paint road marking machine, dy-hal-iii hand push cold paint road marking machine etc. Dayu also supply road marking paints and glass beads, dayu road marking materials include dayu thermoplastic screeding road marking paint, dayu thermoplastic spraying road marking paint, etc. Want to know more? Click here or the following urls: http://www.dyroad.com/single-cylinder-pre-heater.html, http://www.dyroad.com/products.html, http://www.dyroad.com/about-us.html, http://www.dyroad.com/news.html, http://www.dyroad.com/.
Models of dayu road marking auxiliary equipment
DY-MPR Remover
Cold Paint Remover
DY-TT Truck Trailer
Roll Booster
DY-PS Primer Sprayer
DY-LU Loader
Road Cleaner
Thermoplastic Paint
Two-component Road Marking Machine
The two-component road marking is a new type and superior road marking and popular in recent years. It is different from thermoplastic and cold plastic road marking
Cold paint road marking is very common with a long history. Marking types: High-pressure airless type and low-pressure air spray type. Cold paint types: Cold solvent, cold water based cold solvent and
Two-component road marking equipment is a new and superior road marking type. Marking types: Swing structure type, screeding flat-line type and high-pressure airless spraying type. Machine types by au
Thermoplastic Road Marking Machine
Road traffic markings delimit or installed in a variety of lines on the road, arrows, text, graphics and facade mark entity mark, composed of protrusions such as ro
Cold Paint Road Marking Machine
The cold paint road marking is very common with a long history. Different from thermoplastic road marking, it is completed only by one unit road marking machine. In ac
Double-cylinder Pre-heater
Road marking paint is usually divided into the solvent-based and hot melt two categories, solvent type used water-based, organic solvent-based. Water based road marking pai
help
Add to favorite
Favorite products
