anode carbon block

Prebaked carbon anodes are made from petroleum coke and coal tar pitch through a process of mixing, vibration molding and roasting by high-temperature furnace. The resulting blocks are used as anodes in prebake aluminum reduction cells for the production of aluminum. The total capacity of prebake anodes provided by our company is more than 200, 000 tons/year. We can produce them according to individual customer specifications. Our prebake carbon anodes are low Ash, low Sulphur, low Resistivity, high Compressive Strength, high Flexural Strength, high Apparent Density. They are suitable for high-power electrolysis cells. Resistivity 55 µΩm (Max)Real Density 2.06 g/cm³ (Min)Apparent Density 1.56 g/ cm³ (Min)Compressive Strength 38 Mpa (Min)

Add to Basket

Web address

Other goods of this manufacturer :

anode yoke
	Product NatureUsing advanced expandable pattern casting production lines, high-precision detection equipment (inlet direct-reading spectrometers), as well as advanced production process to ensure the

calcined petroleum coke
	Dimensions: 1-4mm / 10-20mm/0-1mm Chemical Composition: Carbon 98.5% minReal Density: 2.06 g/cm3 minAsh: 0.8% maxS: 0.5% max / 2.5%maxMoisture: 0.5% max

Prebaked Carbon Anode
	Prebaked carbon anodes are made from petroleum coke and coal tar pitch through a process of mixing, vibration molding and roasting by high-temperature furnace. The resulting blocks are used as anodes

Prebaked Carbon Anode
	Resistivity 55 µΩm (Max)Real Density 2.06 g/cm³ (Min)Apparent Density

Likewise in category "Non-metallic Mineral Products":

Attapulgi...

Kaolin Bl...

Calcined ...

Taiwan.ru service usage rules

eHouseHolding.com