|
|
COPY CONTROLLER
|
|
1.EASY OPERATION WITHOUT SOFTWARE AND TRAINING ARE REQUIRED 2.16 IDE CHANNELS 3.STANDALONE IPE TO IDE DVD COPY CONTOLLER 4.DATA BUFFER:8MB SDRAM 5.LANGUAGE DISPLAY:ENGLISH,CHINESE,JAPANESE
|
| |
|
COPY CONTROLLER
|
|
|
1.EASY OPERATION WITHOUT SOFTWARE AND TRAINING ARE REQUIRED 2.16 IDE CHANNELS 3.STANDALONE IPE TO IDE DVD COPY CONTOLLER 4.DATA BUFFER:8MB SDRAM 5.LANGUAGE DISPLAY:ENGLISH,CHINESE,JAPANESE
|
| |
|
Mirror Smart Plus
|
|
A standalone SCSI-to-SCSI RAID 1 controller ()Auto fail-eject the handle of tray when one of drives is failed ()Supports drive hot SWAP and Instant Rebuild ()Instant rebuilt of hard drives up to 500M
|
|
|
|
PCI 120 SCSI RAID Adapter
|
|
Built in ARTOSTM (ACARD Real time OS) ()Compliant with 120 SIG IRTOS ()Supports 32-bit PCI 120 Interface ()Built in 32-bit RISC I/O Co-processor ()Supports 5 Ultra Wide SCSI channels ()Supports 15 de
|
| |
|
PCI Ultra 160 SCSI Adapter
|
|
Powerful advanced setup function ()Supports ACARD ASK (ACARD SCSI kernel) ()Int13h extension supported ()Built-in ATP880 32-bit RISC engine ()Low command overhead ()Burst master cycle up to 133MB/Sec
|
| |
|
SCSI-TO-IDE BRIDGE
|
|
1.ARS-2100 IS DEDICATED AS GENERAL-PURPOSE BRIDGE OF SCSI TO IDE INTERFACE 2.EASY TO INSTALL AND GET PERFORMANCE 3.LVD SCSI INTERFACE UP TO 16MB/SEC DATA TRANSTER RATE 4.CROSSS-PLATFORM OPERATION SUP
|
|
|
|
SERIAL ATA RAID CARD
|
|
1.4 SERIAL ATA CHANNELS 2.64-BIT/33Mhz 3.SUPPORTS LARGE VOLUME HARD DRIRES 4.SUPPORTS RAID 0.1.OTL AND JBOD
|
| |
|
SERIAL ATA RAID CARD
|
|
|
1.4 SERIAL ATA CHANNELS 2.64-BIT/33Mhz 3.SUPPORTS LARGE VOLUME HARD DRIRES 4.SUPPORTS RAID 0.1.OTL AND JBOD
|
| |
|
ATA-100 RAID Adapter
|
|
Supports true Hardware RAID Striping ()Capable Booting from RAID volume ()Supports DMA-100 specifications ()Device supports GIDE DMA Hard Disk ()Dual independent channel of 40 pins internal IDE bus (
|
|
help
Add to favorite
Favorite products
