|
|
High Speed Steel Hole Saw
|
|
1. Used for cutting pipes and hard material up to 3mm thick. 2. High speed steel cutting edge. 3. Used for electric drill, portable and pillar drilling machines. 4. Separate arbor required.
|
| |
|
High Speed Steel Hole Saw
|
|
|
1. Used for cutting pipes and hard material up to 3mm thick. 2. High speed steel cutting edge. 3. Used for electric drill, portable and pillar drilling machines. 4. Separate arbor required.
|
| |
|
High Speed Steel Hole Cutter
|
|
1. For cutting thick metal up to 55mm thick. 2. With faster feed rates are reach more cutting teeth. 3. The hole cutter can droll holes three times faster than traditional holemaking tools. 4. The cu
|
|
|
|
High Speed Steel Hole Cutter
|
|
1. For cutting thick metal up to 30mm thick. 2. With faster feed rates are reach more cutting teeth. 3. The hole cutter can droll holes three times faster than traditional holemaking tools. 4. The cu
|
| |
|
High Speed Steel Hole Saw
|
|
1. Used for the sheet metal with 3mm. 2. High speed steel cutting edge. 3. Used for electric drill, portable and pillar drilling machines. 4. Separate arbor required.
|
| |
|
Tungsten Carbide Tipped Hole Cutter
|
|
1. Can cut holes up to 75mm thick. 2. For less horsepower machine. 3. With its very precise and sharp tungsten carbide tipped cutting edges, the hole cutter can be run at higher feed rates and speed
|
|
|
|
Tungsten Carbide Tipped Hole Cutter
|
|
1. Can cut holes up to 75mm thick. 2. Special designed cutting edges. 3. The special tooth arrangement makes cutting smooth. 4. The cutting edges can be resharpened. 5. The Hole Cutters are suitable
|
| |
|
Tungsten Carbide Tipped Hole Cutter
|
|
|
1. Can cut holes up to 75mm thick. 2. For less horsepower machine. 3. With its very precise and sharp tungsten carbide tipped cutting edges, the hole cutter can be run at higher feed rates and speed
|
| |
|
Tungsten Carbide Tipped Hole Cutter
|
|
|
1. Can cut holes up to 75mm thick. 2. Special designed cutting edges. 3. The special tooth arrangement makes cutting smooth. 4. The cutting edges can be resharpened. 5. The Hole Cutters are suitable
|
|
help
Add to favorite
Favorite products
