Address: 21-12, Lung Hsing Lane, Fong Hsing Rd., Sec. 2, Tan Tze Hsiang, Taichung Hsien
Phone: +886-4-25361143
Automatic heel seat and side lasting machine(with hot melt)
1.This machine is used for the lasting operation of the upper’s side and heel part in one operation, and equipped with two floating nozzles. The rod cement of polyester or polyamide is designed for using, which ensures higher flexibility.2. Hydraulic and pneumatic operated system.3. The stop point of the nozzles for the cement path, can be set by the adjustment of the projected laser light directly. Operate simply and control visibly.4. The control of the opening stroke for the left and right nozzles, can be chosen with the upper shape following mode or the constant pressure opening mode. 5. There are three kinds cement volume control can be selected from the touch screen, the heel and the side part is adjusted separately and also with the different operation mode of the cement can be chosen.6. The PLC system is equipped with the touch screen to operate the machine with the graphical symbols.
1.This machine works with the simultaneous actions of side cementing and heel tacking. 2.The heel lasting wiper and tacking seat are combined in the same body, acting simultaneously and electrically a
1. Hydraulic system design suitable for outsole attaching of sports shoes, boots, casual shoes, and kinds of walled shoes. The perfect pressing of outsole, side, toe and heel forming can be accomplish
1. Hydraulic system design suitable for outsole attaching of sports shoes, boots, casual shoes, and kinds of walled shoes. The perfect pressing of outsole, side, toe and heel for
1.This Machine is an automatic machine especially designed to meet the technical requirements for manufacturing the latest and highest quality shoes. After the toes and sides of shoes been lasted, th
1.Lasting shoes at the height less than 180mm. 2.Equipped with the device of lasting height micro switch whcich makes the machine easily adjusted and positioned accurately. 3.The full sizes of wipers
This machine is a plane style and suitable for the cutting of one layer or several layers of such materials as leather, plastics, canvas, nylon, paper boards, vacuum forming products, wood, composit
This machine is suitable for cutting one or several layers of materials, such as leather, plastic, rubber, textiles, card boards and synthetic materials, etc. This machine is extraordinarily quiet,
Adopt the humanized and pictorial one-touch monitor control system. 4 different kinds of cutting dies and 16 sets of memory capacity on the monitor. Equipping the eye sensor safety system and the mec
help
Add to favorite
Favorite products
