Address: Jian Min Building, No.30, Kang Ning Road, Zhuhai, Guangdong, China (Mainland)
Phone: +86-756-8289876
PE Management System for Injection Moulding Machine
Outstanding Power Saving Rate 25%~60%Considering the characteristics of the injection machine, the conventional open-loop control can not reach to an ideal power saving result, however, the EnerGix-I offers an economic control method. It is integrated with the injection machine`s control system, and forms a flux and pressure closed-loop automatic control system. It implements an automatic adjustment of the oil pump motor`s rotating speed according to the flux and pressure signal. Therefore, flux and pressure of the oil pump is adjustable, which leads to the conversion of traditional constant pump to variable pump. While that high flux and high pressure is needed, the motor is fully rotating; otherwise, the motor is decelerated or stops. As a matter of fact, the motor`s efficiency is increased and the power is saved.Super ReliabilityMains and power saving running dual-loop design, with automatic reset, power off reset function, perfect reliability design to ensure the reliability of the whole system.Soft Start DesignAlleviate the vibration of mold locking and unloading to extend the life of mold, while heating minimized and oil temperature stayed, which will lengthen the life of hydraulic pressure system. Therefore, EnerGix-I eliminates the maintenance cost, and enhances the quality of products.Excellent Control PerformanceWith the unique, advanced power saving control technology and motor control chip, the state detection of motor frequency is over 10000 times per second, control motor running state on time; collect energy consumption signal on time, ensure motor running under economic mode, avoid unnecessary consumption; with auto output voltage adjustment function (VAR), appropriate to the electricity network of China.Intelligent Fault Diagnosis and Protection FunctionFault diagnosis display and protection for over-voltage, under-voltage, over-current, overheat, overload, short circuit, phase loss and stalling; perfect electric interlock circuit, which eliminates artificial faults; backup power switching system, which realizes the free conversion of power saving and bypass state.Power MatchingDynamic and intelligent adjustment for the oil pump`s output powerNo Throttle Energy LossChange the circumfluence adjustment into volume adjustmentAutomatic power factor compensationTechnical Characteristics of EnerGix-I1. Compact structure2. Dual-channel input, available for 0~1A,0~10V and 200Hz above impulse signal3. Totally-closed independent ventilation design, dustproof, gas proof, corrosion proof and super environmental adaptation4. Multi-function impulse input interface (0~10KHz) or photoelectric encoder input5. Mains supply/power saving running, safe dual-loop design, with automatic reset, power off Reset function to realize the continuity of manufacturing6. Multi-protection function: Under-voltage, over-voltage, overload, leakage, output short circuit protection7. Built-in PID adjuster and 24V output power supply8. Provide curve setting of control voltage and output frequency, couple with different oil pump motor to preserve high efficient running
Energix-G is the latest break-through Power Efficiency (PE) management product, which is mainly applied to the loads driven by AC asynchronous motors. According to the running state, parameters and lo
Energix-G is the latest break-through Power Efficiency (PE) management product, which is mainly applied to the loads driven by AC asynchronous motors. According to the running state, parameters and lo
Application Scope of EnerSine Mini SLC1.Municipal street lighting saving and protection, suitable for multi-types of lamps with/without capacitors and electronic energy saving lamps2.Dock / port light
General introduction of enersine-aThis system consists of IPC, signal collection board, A/ D converter, D/ A converter, I/ O, specialized inverter, data processing and controlling software, speed redu
Central a / c intelligent power efficiency systemWhy chose central a / c i-pe system?As we know, the electric power consumption by central air-conditioning system is more than 40% of the total energy
Application Scope of EnerSine Mini SLC1.Municipal street lighting saving and protection, suitable for multi-types of lamps with/without capacitors and electronic energy saving lamps2.Dock / port light
Intelligent Power Efficiency System for Central Air-conditionerCentral A/C intelligent PE system is a closed-loop automatic control system, which is integrated with the technologies of industry comput
help
Add to favorite
Favorite products
