Russian German French    |    help
   Add to favorite    Favorite products
   
Description
Industrial Equipment /  Light Industry Equipment /  Textiles Machinery / 
Send Request

about this service

Producer information
Company:
Jiangyin No. 4 Textile Machine Manufacturing Co., Ltd.
 
Address:
No.4, Yong'an Road, Changshou, Zhouzhuang Town, Jiangyin, Jiangsu, China (Mainland)
 
Phone:
+86-510-86963830 +86361210

35 Degree V-Shape Circulated Bobbin Creel


V-shaped circulated bobbin creel is assorted with direct warping machine for chopped fiber. Its advantages include: shorter creel body, no carrier between frame and creel reed, especially adapted for some chopped fibers which are sensitive to friction, working under low tension and high speed, and be favorable to reduce extension difference of yarn and end breakage when warping.The interleaving creel optimizes the space utilization. The inner side of V-shaped creel could be store bobbin, which is convenient for operation. The bobbin changing time is short so that can save idle period for warping machine. This kind of bobbin creel is especially fit for high speed warping.1. Way of bobbin changing: put the bobbin in the inside of the creel in advance, and change the bobbins collectively through driving and turning of endless chain2. Both sides of the creel is in V shape, adopting turning outside yarn guide type to guide yarn, no yarn carrying plate, so the yarn functioning freely and no yarn friction3. Breakage and monitoring: single spindle photo electricity inspection, even the fine count yarn is also inspected accurately4. Every spindle is equipped with break and display and switch, so it is convenient to deal with break end, and can gain high production efficiency5. The tension difference in the back creel and front creel can be reduced by adjusting the angle through the tension roller. The minimum yarn difference can be gained through this way. Another function of the tension roller is to unfasten the ties when start the machine again, which will be stopped when unreeling at high speed. It is good to high speed unreeling6. In order to avoid the yarn looseness when reducing the speed, every spindle has yarn clamp device, which can add soft brake to the yarn when starting and stopping7. Yarn cutting: manual, or power driven8. Dust control: electric reciprocating-walk type9. Independent control casing is installed in front of creel

Add to BasketAdd to Basket Web addressWeb address



Other goods of this manufacturer :
Ball Warping Machine (GA251)
 Ball Warping Machine (GA251) ( Ball Warping Machine (GA251))
Collect, warp and wind warp into ball shape for the use of rope-dyeing.1. Shape diameter: 800mm, 1,000mm2. Shape width: 1,000mm, 1,200mm3. Warping speed: ≤400m/min4. Warping length error: ≤0.2%5
Cement
 Cement ( Cement)
We can supply a variety of cements. The annual output of 32.5-level and 42.5-level Portland cements is 300,000MT.
Cement
 Cement ( Cement)
We can supply a variety of cements. The annual output of 32.5-level and 42.5-level Portland cements is 300,000MT.
Flat Yarn Warping Machine (GA278)
 Flat Yarn Warping Machine (GA278) ( Flat Yarn Warping Machine (GA278))
It is used to weave folk fabrics, carpet base fabrics, packing bags and decorations.1. Winding diameter: 800mm, 1,000mm2. Warping rate: ≤ 150m/min3. Lifting stroke of the platform: 500mm4. Single y
High Speed Direct Warping Machine (GA125)
 High Speed Direct Warping Machine (GA125) ( High Speed Direct Warping Machine (GA125))
This machine can accurately control the winding density, length and arrangement of warp yarn, thus it is suitable for directly warping of various cotton yarns and T/C yarns, and is the pre-weaving pre
High Speed Direct Warping Machine (GA269C)
 High Speed Direct Warping Machine (GA269C) ( High Speed Direct Warping Machine (GA269C))
The machine can be applied to directly various chopped yarns. It has the characteristics of high efficiency, uniformity density and flatness thread, so this kind of machine is the ideal equipment for
New Type Creel
 New Type Creel ( New Type Creel)
The new type of two discs, no post, and positive turning creel is suitable for various count yarns, and it also can meet the demands of direct and sectional warping. It is specifically divided into tu
Sectional Warping and Beaming Machine (GA163D)
 Sectional Warping and Beaming Machine (GA163D) ( Sectional Warping and Beaming Machine (GA163D))
This machine is suitable for warping all types of yarns including worsted wool yarns, high twisted filament silk yarns. It can be instead of imported sectional warping machines, providing high quality
Sectional Warping Machine (SHGA215C)
 Sectional Warping Machine (SHGA215C) ( Sectional Warping Machine (SHGA215C))
This machine is suitable for warping all types of yarns including worsted wool yarns, high twisted filament silk yarns. It can be instead of imported sectional warping machines, providing high quality

Likewise in category "Textiles Machinery":
A-15 Air Gun
A-15 Air G...
A-12 Sample Cutter
A-12 Sampl...
#5 PARTS(5)
#5 PARTS(5...
Fan cleaner--SSII70
Fan cleane...
A-03 Needle
A-03 Needl...
A-01 Cam
A-01 Cam
 
Copyright © 2006 - 2011 Asia.ru
 
eHouseHolding.com