T-FSK7150HPRODUCT DESCRIPTION:Foil-Scrim-Kraft backing, combined with a transparent high performance rubber-resin adhesive, protected by an easy-release silicone release paper.T-FSK7150SCONSTRUCTION:Backing: FSK Facing (Foil 7u / Tri-Way Scrim 8x12/100mm / Kraft 50gsm)Adhesive: Acrylic PSA. Solvent-Based AdhesiveLiner: White PE-Coated Silicone Release Paper.FEAUTURES:1. Foil-Scrim-Kraft backing provides excellent reflection of both heat and light.2. High quality adhesive with super strong adhesion and holding power offers reliable and durable Foil-Scrim-Kraft Facing joints and seams sealing in HVAC ductwork application,3.Low moisture vapor transmission rate makes FSK tape an excellent vapor barrier.4. Service Temperature range: -20 ~ +80°C (-4 ~ +176°F)PRODUCT FORM & SIZE AVAILABLE:Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4")Log Roll: 1200mm x 45 / 50mJumbo Roll: 1200mm x 750m/730mSTORAGE & SHELF LIFE:One year when stored at 21C (70F) / 50% relative humidity out of direct sunlight.SURFACE PREPARATION:It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.PRODUCT USE:It is essential that the user evaluate the product to determine whether. It is fit for a particular purpose and user`s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on product between +10 and 40°C (+50 and +105°F).
TYPICAL APPLICATIONS:Centrifugal glasswool is a silk-like material made by fiberization in the TEL process and spraying of thermosetting resin . By further deep processing of thermal setting ,this mat
ITEM: FKSV-7601BFacing compositionAluminium Foil: 7uHeat-Resistance AdhesiveKraft Paper: 60gsm(Natural)Two-Way Fiberglass Scrim: 12.5*12.5mmPolyethylene:25gsmSize: According to specific requirementsIT
To prevent airflow through a wallTo stop (and drain) liquid water that has penetrated through the exterior finish.To allow water vapor to pass through.Energy savingUV and heat resistance
Product Name: I BeamModel Number: GB 10-30. EN , ASTMPlace of Origin: ChinaOur company can supply GB-706-88 10#-30#, EN Standard and ASTM Standard I beams.Outer packing:As per requests of Clients
help
Add to favorite
Favorite products
