Информация о производителе
|
.
Detailed Product Description1Warm air hand dryer 2.Operation: Electronic sensor operated3Casing: Bright finish 4Voltage: 220-240 V 5Frequency: 50/60 Hz 304stainless steel hand dryer, high speed hand dryer,jet hand dryer,new mould hand dryer Warm air hand dryer Operation: Electronic sensor operated Casing: Bright finish Voltage: 220-240 V Frequency: 50/60 Hz Power: 2300 W Product dimensions: 246×280×216 mm Weight: 6.0 kg Packing: 2 pcs It's he best choice for hotel, airport, restaurants, hospitals and office. | Description | Materials | Technical Specifications | Operation | Specification |* General Description•Warm air hand dryer.•Sensor operated.•Maximum power and airflow.•Maximum robustness and vandal-proof.•Suitable for very high traffic facilities.•It normally goes along with a soap dispenser.* Components and Materials• 304stainless steel one-piece cover with bright finish, 1mm thick. Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special L wrench.• Base in aluminium, 3 mm thick, with 4 Ø 8 mm holes for wall mounting.• Fire resistant plastic 94-VO fan scroll.• Universal brush motor, 7200 rpm, F class, included a 2 A fuse with sealed and self-lubricated ball bearings. • Aluminium centrifugal double symmetrical inlet fan wheel.• Waved wire NiCr heating element on a mica frame that incorporates a self-resetable thermal cut-off at 80 ºC.• Nozzle in chrome plated zamak, 22 μ thick.• Two distances (15/20 cm) IR electronic detection sensor.* Technical SpecificationsFrequency50/60 Hz Dimensions246×280×216 mm Air velocity96 Km/h Noise level (at 2 m)70 dB Protection levelIIPX1 * Operation Place the hands under the air outlet grill. The dryer will start automatically, and go on with no interruption as long as the hands are kept in the detection range of the sensor till 60seconds. The appliance will stop 3 seconds after the hands are removed from the airflow. * SpecificationSurface mounted vandal resistant hand dryer shall be manufactured with one-piece 1 mm thick 304stainless steel with bright finish cover, and fixed to the base by means of 2 vandal-proof lock screws and lock with special wrench. The back base shall be aluminium, 3 mm thick and with 4 holes Ø 8 mm for wall mounting. Cover shall be equipped with a chrome-plated 360º revolving vandal-resistant nozzle for hand and face drying. The nozzle, with an airflow diameter of 57 mm, should be equipped with a 1,5 thick zamak grill to make the inside components inaccessible. The dryer shall be activated through an infrared electronic sensor and shall automatically turn off three second after hands are removed. Motor shall be 250 W, 7200 rpm, universal type, on resilient mounting, B class, with 2 A fuse with sealed, self-lubricated ball bearing. The waved wire NiCr heating element mounted on a mica frame should be located inside the fan scroll, and should incorporate a self-resetable thermal cut-off which will disconnect at 80 ºC. The fan wheel should be of aluminium, centrifugal with double symmetrical inlet, and the fan scroll shall be made of a fire resistant plastic 94-V0. Dryer shall deliver 330 m3/h of air at 53 ºC and 101 Km/h velocity during user controlled drying cycle. The dryer shall have a total power of 2.350 W with a consumption of 10.9 A. Noise level should be 70 dB at 2 m distance. Protection level against water splashes should be rating Ipx1. Overall dimensions shall be 248 x 278 x 210 mm. Unit shall be VDE approved and CE marked and comply with electrical safety directives 73/23/CEE & 93/68/CEE and electromagnetic compatibility directives 89/336/CEE & 92/31/CEE. * Installation * Serial Installation Nº dryers to be fitted:In toilet areas with a normal frequency of use and only one wash-basin: 1 dryer.In toilet areas with a normal frequency of use and more than one wash-basin: 1 dryer for each 2 wash-basins.1 row of 4 wash basins: 2 dryers; 1 row of 6 wash basins: 3 dryers; 1 row of 8 wash basins: 4 dryers.In toilet areas with high traffic and more than one wash-basin: 2 dryers for each 3 wash-basins.1 row of 4 wash basins: 3 dryers; 1 row of 6 wash basins: 4 dryers; 1 row of 8 wash basins: 5 dryers. Ideal Location:Between the wash-basin and exit. It is not recommended to install dryer between wash-basins, next to urinals, lavatories and showers. If installing automatic dryers over marble surface or ledge, the minimum distance from the dryer to the ledge must be 400 mm. It is recommended that hand dryers be distributed throughout the washroom area to avoid overcrowding. Recommended heightsDistance from the floor We reserves the right to make changes and/or modifications to the products and their specifications without prior notice.
|
336x280 banner
|
336x280 banner
|
|
помощь**
Добавить в избранное
Отложенные товары
