|
|
Hinge Boring Bits
|
|
Two flute cutters fitted with 3/8`` diameter guide bearing to produce a beading,profile with 1.59mm (1/16``) step.
|
| |
|
Panel Mould Bits
|
|
Two flute classical profile with bottom radius. ,The cutter will plunge cut and is suitable for decorative edge and panel molding.,
|
| |
|
Profile Scribing Bits
|
|
Straight 2 flute cutters with TC tips. ,These cutters are relieved on the bottom for pluging and are suitable for grooving, rebating and sha,llow morticing on solid timber and man-made boards.,
|
|
|
|
Router Bit (Handrail Bit)
|
|
Two flute cutter with 1/2 guide bearing to mold the sides of handrails ()The top of the handrail is, cut with our thumb mold bit () () () () () () (),
|
| |
|
Router Bits (Finger Joint Assembly)
|
|
A set of three flute cutters with spacers and a bearing ()Various combination of cutters may be used, to cut joints on timber of different thickness ()from 11mm(7/16 ) to 35mm (1-3/8 ) ()The design
|
| |
|
Router Bits(Crown Molding)
|
|
Two flute cutter with a decorative profile for crown molding ()This will also be suitable for produc,ing wide decorative molds with many uses in furniture making () () () () () () , (),
|
|
|
|
Router Bits(Raised Panel)
|
|
Two flute cutter with 5/8 guide bearing to produce a straight 12 Xchamfer ()with bead profile pane,l raise with a raised width of 31.75mm(1-1/4 ). ()The back cutter fitted below the bearing from a
|
| |
| |
|
Trimming Bits
|
|
Two flute cutters with shank mounted bearing fixed with locking collar.,Precision ground tool with relief grinding on the cutter tip to allow plunge cutting.,Suitable for freehand flush trimming,and
|
|
help
Add to favorite
Favorite products
