Address: Kuangyan Developing Zone, Ningbo, Zhejiang, China (Mainland)
Phone: +86-574-63535966
Spiral Wound Gasket
StructureThe metal wound gadket is made of "V"-shaped or "W"-shaped metal ribbon and non-metal ribbonBy continuously overlapping and winding. Both ends of metal ribbon are spot welded.Features( 1) It is xuitable to wide application, high temperature resistance, high pressure resistanceAs cryogenic and vacuum condition. The combination of gasket material can be modulated to meetChemical corrosion resistance requirement.( 2) High stress compensation capability. Constant and reliable sealing even at working positionUnder a fluctuated pressure and temperature.( 3) Perfect sealing performance.( 4) No overstrict requirement on the surface of flanges.( 5) Easy installation and low pre-tightening specific pressure.Gasket Types:( 1) There are four types: Hy-6035 Basic type gasket for motched joint flange; Hy-6036 gasket withInner ring for raised face flange; Hy-6037 gasket with outer ring for smoothing flat welded flangeAnd; Hy-6038 gasket with inner and outer rings for smoothing butt welded gasket.( 2) The material:( A) steel ribbon: 304, 1Cr18Ni9T (321) , 316 and 316L, etc.( B) Ring: mild steel, oCr13, oCr18Ni9, 304, 316 and 316L, etc.( C) Non-metal ribbon: flexible graphite, special-purpose asbestos, Teflon and non-asbestos sheet.
Structure:The stretched and reinforced raw Teflon material is braided into this type of packing.Features:(1) Outstanding corrosion resistance.(2) Suitable to all kinds of chemical medium with certain
Structure:The stripe is made of Teflon dispersed resin, graphite powder and proper high temperature lubricant and then traided into packing.Features:(1) Outstanding chemical and corrosion resistance.(
Expanded Graphite Sheet/Rolls are selected from the high natural flake graphhite. They are made through the advanced chemical threatment and mechanical procedure, etc.
Expansion Teflon self-adhesive tape is a white pure Teflon product with low density. It features a perfect flexibility, compressibility, outstanding corrosion resitance, aging resistance, creep resita
This producr is made from materials of three layers.At the middle of the composite plate is a stainless steel plate and on the sides expanded graphite plate. Then through speciallty pressing or sticki
Structure:The acrylic fiber is carbonized under high bemperature, then dipped into teflon emulsionAnd braided into carbonized fiber packing.Features:(1) suitable to dynamic sealing under general worki
Structure:Expanded graphite stripe is braided into packing. Carbon fiber, copper wire, 304, 316and nickelAlloy wire is available as reinforcement.Features:( 1) The most effective sealing packing under
Structure:The cutting pure flexible graphite sheet is wound and molding pressed into ring-like packing.Features:( 1) Fine self-lubricating.( 2) High elasticity coefficient( 3) 45 degree bevel cut is a
Structure:Fiberglass is expanded in a special facility with high pressure air and mixed with fineGraphite powder and rubber resin and then braided into packing with lubricant.Features:(1) it features
Likewise in category "Spare Parts for Industrial Equipment":
help
Add to favorite
Favorite products
