Address: (Inside Tongxiang Zhe'neng Electric Power Trade Co., Ltd.);South 320 National Highway,1st Phase of Industrial Park,Economic Deve
Phone: +86-573-8185568
Epoxidized Soybean Oil
ESO is finely produced from high quality natural raw materials and has passed the toxicity tests of Disease Control Center, Shanghai Food and Drug Administration and SGS.Properties:Appearance: Light yellow sticky oily liquidMolecular formula: C57H106O10 Molecular weight: about 1000Fluid point: -3 deg.c, Boiling point: 150deg.c (0.5Kpa),Viscosity: 325mpa.s, Refractive Index: 1.472 (25deg.c)Solubility in water :It is soluble in hydrocarbon compounds, ketones, esters, higher grade alcohols and other organic solvents, slightly soluble in ethanol as well.It is the most widely used PVC nontoxic plasticizer and stabilizer. It is particularly consistent with PVC and has low volatility and mobility. Its high thermal stability, light stability and good resistance to water and oil endow the products with better mechanical strength, weather resisting property and electrical property. Its non-toxicity makes it the internationally acknowledged chemical aid for foodstuff wrapper. It can be applied to all PVC products, such as, foodstuff wrapper, medical ware, pellicle, sheet material, tubular goods, sealing plate of icebox, artificial leather, floor leather, wire and cable material, plastic wallpaper and other daily use plastic products. It can also be applied to making special printing ink, oil paint, coating material, synthetic rubber, liquid compound stabilizer and so on.Standard: accordant to Q/JAHG002Standard Item First Class RegularColor Shade, (Pt- Co ) max 150 200Density ( 20deg.c) g /cm3 0.985~0.995Acidity , mg KOH/g max 0.50 0.60Flashing Point deg.c min 280 270Loss on Heat % max 0.30 0.50Iodine Value % max 6.0 8.0Epoxy Value, % min 6.0 5.5Usage and Dosage:Jointly used with polyester plasticizers, it can reduce their mobility, while with metal heat stabilizers, it would greatly enhance their stability, and the dosage of these metal stabilizers necessary can be reduced to only one third of that used alone. As far as compatibility with PVC, ESO is equivalent to DOP and is better in terms of plasticizing efficiency. Thus the total need of plasticizers would be less. It does not only bring down the cost, but also improves the technical standard of our products, such as the tolerance of impact, transparency, printability, weld ability and so on. 5~10 portion of ESO would remarkably ameliorate the heat and light stability of soft products. Under special situation, 10~30 portion of ESO used non-open-air, no other stabilizers is necessary. The addition of this chemical, will cut down the amount of other plasticizers, stabilizers and lubricants needed.
DDS28 single-phase static watt-hour meter is designed for measuring activeenergy in single-phase alternating current power grids by connecting upresident power supply system. It complies with the stan
Scientific name:Trioctyl Trimellitate Molecular formula: C33H54O6Molecular weight: 546.23Properties:TOTM is the major permanent and heat resisting plasticizer. Concurrently, it bears the virtue of pol
It`s a fire-proof and lasting primary plasticizer, with the good points of polyester plasticizer and monomer plasticizer. Its electrical property is pretty good and mainly used in the fire-proof elect
It`s a fire-proof and lasting primary plasticizer, with the good points of polyester plasticizer and monomer plasticizer. Its electrical property is pretty good and mainly used in the fire-proof elect
It`s a fire-proof and lasting primary plasticizer, with the good points of polyester plasticizer and monomer plasticizer. Its electrical property is pretty good and mainly used in the fire-proof elect
Composition: 78% viscose, 22% polyesterWidth: 57", 110"Weight: 850g/m x 57"Specification: viscose for pattern, polyester for plain; 150D x 150D; 3.5N x 3.5N
Composition: 78% viscose, 22% polyesterWidth: 57", 110"Weight: 850g/m x 57"Specification: viscose for pattern, polyester for plain; 150D x 150D; 3.5N x 3.5N