Russian

German

French |

help

Add to favorite

Favorite products

Description

Industrial Equipment / Other Industrial Equipment / Pollution Control Equipment /

Zoom in

Send Request

about this service

Producer information

Company:
CHEN HONE MACHINERY CO., LTD.

Address:
26 Erh Chia Rd., Ying-Ko Chen, Taipei Hsien

Phone:
+886-2-26708458

DUST COLLECTOR

This high pressure dust collector is a central dust collecting equipment. It can be installed multiple duct engineering at many place for suction holes and which is provided clean uses for the whole plant. It is used very convenient and rapid. One only take the camlock coupling of flexible suction duct to connect with near somewhere`s PVC duct camlock coupling, And then open that valve you can start to operate it. If you operate the traditional dust collector that you have to take it to run all around anywhere. Due to this flexible suction duct is combined with the dust collector. So when you want to move it to another plave foe cleaning that you also have to change another source socket of this dust collector. If there is no any source socket on the spot that even have to use extend cable. Furthermore when we during operate this traditional dust collector that will make a loudly noise and we need to care it will be overturning at any time. Our ``high pressure central dust collector`` does`nt have faults like the traditional dust collector. It can be saved space and non-noise which can be improved both the working environment and the working efficiency.

Add to Basket

Web address

Other goods of this manufacturer :

DUST COLLECTOR
	The dust air enter through the dust levels air inlet, then it goes through the distribution baffle where the dust exhaust air is spread evenly among the filter bags. The pulse valve is then turned on

FILTER PRESS
	1.The hydraulic system provide concentrated pressure, easy operation and high working efficiency. 2.Non add chemical feeder divice and non wash filter clothes during operation that can be saved opera

SPRAY DRYER
	1.Extremely short time for drying, normally 10 to 30 seconds and moisture content controlled within the range of 0.5% to 10% as desired GSpray drying is especially recommended for drying the heat-sen

SPRAY DRYER
	1.Extremely short time for drying, normally 10 to 30 seconds and moisture content controlled within the range of 0.5% to 10% as desired GSpray drying is especially recommended for drying the heat-sen

SPRAY DRYER
	1.Extremely short time for drying, normally 10 to 30 seconds and moisture content controlled within the range of 0.5% to 10% as desired GSpray drying is especially recommended for drying the heat-sen

SPRAY DRYER
	1.Extremely short time for drying, normally 10 to 30 seconds and moisture content controlled within the range of 0.5% to 10% as desired GSpray drying is especially recommended for drying the heat-sen

SPRAY DRYER
	1.Extremely short time for drying, normally 10 to 30 seconds and moisture content controlled within the range of 0.5% to 10% as desired GSpray drying is especially recommended for drying the heat-sen

WET SCRUBBER
	The purpose of web scrubber is to get rid of acids in waste air. Although wastewater is produced by this process, manufacturers who already have wastewater treatment processes in place will not find

BUCKET ELEVATOR
	Our bucket elevator is used mainly in powder delivery.It`s especially suitable for narrow space and high level delivery. Its advantages as follows G (1).Simple in construction. (2).Low maintenance co

Likewise in category "Pollution Control Equipment":

Taiwan.ru service usage rules

eHouseHolding.com