Address: Room 1702, No.2123, Pudong Road, Pudong New Area, Shanghai, China (Mainland)
Phone: +86-21-68537850
Aluminium Sheets
Table 1. Typical composition of aluminium alloy 6061Component Amount (wt.%)Aluminium BalanceMagnesium 0.8-1.2Silicon 0.4-0.8Iron Max. 0.7Copper 0.15-0.40Zinc Max. 0.25Titanium Max. 0.15Manganese Max. 0.15Chromium 0.04-0.35Others 0.05Key PropertiesTypical properties of aluminium alloy 6061 include:Medium to high strengthGood toughnessGood surface finishExcellent corrosion resistance to atmospheric conditionsGood corrosion resistance to sea waterCan be anodizedGood weldability and brazabilityGood workabilityWidely availableNote: Property data is provided below, but should be used a guide only. As data mayvary between manufacturers, you should consult your supplier for more exact figures.Physical PropertiesDensity: 2.7 g/cm3Modulus of Elasticity: 70-80 GPaPoissons Ratio: 0.33Mechanical PropertiesTemper Ultimate Tensile Strength (MPa) 0.2% Proof Stress (MPa) Brinell Hardness (500kgload, 10mm ball) Elongation 50mm dia (%)0 110-152 65-110 30-33 14-16T1 180 95-96 16T4 179 min 110 minT6 260-310 240-276 95-97 9-13Thermal PropertiesThermal Conductivity: 173 W/m.KElectrical PropertiesElectrical Resistivity: 3.7-4.0 x10-6 Omega.cmTypical Heat Treatment/Temper StatesTreatment DefinitionF As fabricated0 Annealed to obtain lower strength temperT1 Cooled from an elevated shaping process and naturally aged1T4, T4511 Solution heat treated and naturally aged2,3T51 Cooled from an elevated shaping process and artificially agedT6, T6511 Solution heat treated and artificially aged2,3Note:1. This designation applies to products which are not cold worked after cooling froman elevated temperature shaping process, or in which the effect of cold workin flattening or straightening has no effect on mechanical properties2. This designation applies to products which are not cold worked after solutionheat-treated, or in which the effect of cold work in flattening or straighteninghas no effect on mechanical properties3. This designation applies to products which are not cold worked after solutionheattreatment, or in which the effect of cold work in flattening or straighteningdoes not effect mechanical properties.
6061t6 aluminum sheet, specially for cars, trucks, tanks and airbus parts and so on. It has high resistance corrossionm, good welding. It cma be a good material for manufacturing and industrial reques
The aluminum containers is for catering, picnic, baking, air-line use or cakeWe have standards for the USA, the Middle East, Japan and the UKWe can make the moulds according to your specifications for
8011 o aluminum foil for food packing, medecine used, aircondition used. The thickness is 10micron from 200micron. Foil for food packing is 10micron to 30micron. And the thicknes from 30-60micron is f
8011 o aluminum foil for food packing, medecine used, aircondition used. The thickness is 10micron from 200micron. Foil for food packing is 10micron to 30micron. And the thicknes from 30-60micron is f
8011 o aluminum foil for food packing, medecine used, aircondition used. The thickness is 10micron from 200micron. Foil for food packing is 10micron to 30micron. And the thicknes from 30-60micron is f
This al-foil can be used in many fields ,such as manufacturing and household .We can provide you the defferent packing and the clour as you request . We have exproted this foil to many countries . It
Likewise in category "Non-ferrous Metal Products":
help
Add to favorite
Favorite products
