Address: East 4/F, Building 404, Sangda Xiaoqu, Zhenhua Road, Futian, Shenzhen, Guangdong, China (Mainland) Zip: 518000
Phone: +86-755-83350900
Mobile Charger
Style: mobile charger (528-930)1) Rated output voltage: DC 5.5V2) Output position: equipped with USB standard interface3) Max. output current: 550mA4) Max. output power: 3W5) Efficiency (typical): 68%6) Input voltage range: 110-250V7) Input frequency range: 47-63Hz8) Output voltage accuracy: no load voltage: 5.20-5.95V9) Max. input regulation factor: ±10%10) Max. load regulation: ±20%11) Output ripple and yawp: 10% of output voltage (max.)12) Output overpressure protection: 120-170% (adjustable as customer`s request)13) Output over-current protection: over-current protection point about 110-160% rated output current; recover point14) Charging status: charging current is the most while there is no power in battery; charging time the longest. While battery is in full condition, charging time is shorter or no need charge. When battery is full, the charging current is 10-20mA, and charging time is 2.5-3h in general conditions15) High-pressure isolation voltage: input end - output end: AC 1.5kV/50Hz adding power, 1min: current leak16) Working temperature parameter: working temperature coefficient is ±0.05%/°C; absolute coefficient is 0.8°C/W; absolute temperature rise is 25°C±5°C while working output is rated power17) Environment parameter: storage environment: -20°C~+85°C; 10%~95% RH; working environment: -20°C~+50°C; 20%~90% RH (depends on using environment and power)18) Heating loss mode: consecutive working system, machine body naturally cooling (using environment and fixing position difference to influence power usage quantity19) Dimensions: L59 x W25 x H48mm20) Net weight: total 50g21) Design criterion: Nation Standard GB-4943-2001; GB17625.1-199822) Stability test: complies with MIL-HDBK-217 BELLCORE TR-MWT-332Note:1) Inspection index stated above is gotten from under condition: in the area of input rated voltage and output rated loading. Environment: 25°C, 85% RH, when there is no wind moving around2) Output voltage DC ripple test: at the test point, with a parallel twisting string (30cm long, section: 1m², connect 0.1μF and 0.47μF capacitance with one side), respectively inspect the largest number Vp-p 100Hz of 100Hz main frequency and general ripple Vp-p max.3) Li voltage regulation factor: input voltage changing in rated area while load is rated; Li regulation factor: load is changing from 0 to rated value
Style: mobile charger (8800)1) Rated output voltage: DC 5.5V2) Output position: 1.0m long output cord, equipped with 18P-006 standard interfaceFrom left to right on the arrowhead: 1/2/3-pin is anode,
Style: mobile charger (F8)1) Rated output voltage: DC 5.4V2) Output position: equipped with USB standard interface3) Max. output current: 550mA4) Max. output power: 3W5) Efficiency (typical): 68%6) In
Mobile charger (N73):1) Rated output voltage: DC +5.5V2) Output position: 1.0m long output cord, equipped with 18P - 006 standard interface.From left to right on arrowhead: 1 / 2 / 3 pin is anode, 6 /
Mobile charger (N73):1) Rated output voltage: DC +5.5V2) Output position: 1.0m long output cord, equipped with 18P - 006 standard interface.From left to right on arrowhead: 1 / 2 / 3 pin is anode, 6 /
1) Model no.: K5002) Image sensor: 5.0 mega pixels, 1/2-inch color CMOS sensor3) Screen: 1.7`` color TFT LCD4) Video recording: N/A5) High precision 6-glass plus infrared filter6) Focus: 1.2m to infin
help
Add to favorite
Favorite products
