Spring Hammer Impact Introduction:The spring Hammer consists of three principal parts: the body, the striking element and the release system.It's used to test the mechanical integrity of product enclosures. After applying the impact with the hammer, the product is examined with accessibility probes to determine access to shock, energy, and injury hazards. Built in exact accordance with IEC/EN, UL/CSA and other international standards.Application:Impact hammers are used to check the durability of enclosures for electrical appliances and household of other electronic products such as shell, lever, handle, knobs, lights and others. If damage occurs from the Impact Hammer test, accessibility probes can be used to measure the extent or severity of the damage. The Impact Hammer simulated the mechanical impact to which electrical equipment may be subjected.Types:We offer 0.14J/0.20J/0.35J/0.50J/0.70J/1.0J/2.0J/5J Spring Hammer TestTechnical Parameters:Length: 211mmWeight: 1250gOD: 50mmHammer Weight: 60gHammer radius: 10mmThe release force of impact:
1000V Digital Insulation Resistance TesterTechnical IndexOutput Voltage: DC 500V/1000V; ±5%Output VoltageDC 500V/1000V; ±5%Resistance Range2MΩ: 0.5MΩ~1.999MΩ20MΩ:
IEC60061 E14 Lamp Caps Go No GO GaugePosted on April 13, 2013 by adminGauge Type: E14 Lamp Cap GaugeReference Standard: IEC60061-3Model Number: 7006-27F-1 Go Gauge for E14 Caps on Finished Lamps7006-2
E17 Lamp Cap Go No Go Gauge
Category of E17 Lamp cap Gauges:
7006-27K-1: "Go" Gauge for caps on finished lamps
7006-28F-1: "Not Go" Gauge for caps on finished lamps
7006-26D-1: Gauge for tes
IEC60061-3 E27 Lamp Cap GaugePurpose:To check protection against accidental contact during insertion of caps E27 on finished lamps.Testing:The shapes of the lamp with regard to protection against acci
Glow Wire TesterSpecification:Glow Wire Test Instrument is according to IEC60695-2-1, IEC60695-2-13 (GB/T5169.10-2006~GB/T5169.13-2006), and UL746A, IEC829, DIN695, VDE0471, the glow wire Test Instrum
IEC 60061-3 GU10 lamp Gauge 7006-121-1 for lamp caps and bases According to the requirement of standard IEC60061, szcx produced high accuracy and high quality "Go" and "Not g
Hipot TesterInstructionThe 2672A is a high-precision hipot tester with warning function. The tester’s output voltage, current and timing are for digital display. And it’s a nece
IEC60529 IP1X Test SphereThe IEC60529 IP1X Sphere Probe is intended to verify the basic protectiion against access to hazardous parts. It's also used to verify the protection against access w
Hilfe
Zu Favoriten 
Dem Warenkorb hinzugefügte Favoriten
